Enclosures and housings
MFL Probe Water-Jacket Housing Assembly
- Bounding box
- 70.0 × 109.0 × 43.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
Design a rectangular aluminum water jacket housing for an MFL NDT probe. The outer block is rectangular. Inside the housing, place two permanent block magnets side-by-side, each with dimensions 25mm length x 25mm width x 25mm height. Directly on top of each magnet, place a ferrite core piece of size 4mm width x 3mm depth x 50mm length. Position a TMR2901 sensor precisely in the middle space between the two magnet-ferrite assemblies. Design internal cooling channels (water jacket) wrapping tightly around these components with inlet and outlet ports on the side for continuous water cooling to withstand high-temperature inspection environments.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing X (length) | 70 mm | 40 – 160 |
| Housing Y (width) | 80 mm | 40 – 160 |
| Housing Z (height) | 43 mm | 20 – 120 |
| Wall thickness | 5 mm | 3 – 15 |
| Cooling channel dia | 4 mm | 2 – 8 |
| Channel height offset | 0 mm | -10 – 10 |
| Magnet cube edge | 25 mm | 10 – 35 |
| Gap between magnets | 10 mm | 4 – 30 |
| Ferrite length (X) | 50 mm | 20 – 70 |
| Ferrite width (Y) | 4 mm | 2 – 12 |
| Ferrite thickness (Z) | 3 mm | 1 – 10 |
| Sensor X | 3 mm | 1 – 8 |
| Sensor Y | 2 mm | 1 – 8 |
| Sensor Z | 1 mm | 0.5 – 5 |
| Port fitting dia | 10 mm | 5 – 20 |
| Port fitting length | 15 mm | 5 – 40 |
| Port bore dia | 6 mm | 2 – 12 |
| Port hex across-flats | 14 mm | 8 – 24 |
| Port hex height | 4 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no