Enclosures and housings
Mercedes W168 Center Console Shell
- Bounding box
- 215 × 235 × 115 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
// --- PARÂMETROS GABARITADOS DO CONSOLE MERCEDES W168 --- const largura = 215 // Dimensão X total em mm const comprimento = 235 // Dimensão Y total em mm const altura = 115 // Dimensão Z total em mm const espessura = 2.5 // Parede interna para impressão 3D const tamFuroBotoesX = 100 const tamFuroBotoesY = 45 const tamFuroCambioX = 100 const tamFuroCambioY = 100 // 1. ESBOÇO DA BASE EXTERNA (VISTA DE CIMA) const baseConsole = startSketchAt([0, 0]) |> lineTo([largura, 0], %) |> lineTo([largura, comprimento], %) |> lineTo([0, comprimento], %) |> close(%) // 2. EXTRUSÃO TRIDIMENSIONAL DO CORPO BRUTO const corpoBruto = extrude(baseConsole, length = altura) // 3. CRIAÇÃO DAS PAREDES OCAS (SHELL) DE 2.5MM // Remove a face inferior (chão) deixando o console oco para encaixe no painel const consoleOco = shell(corpoBruto, thickness = espessura, facesToRemove = ["bottom"]) // 4. ESBOÇO DOS CORTES NA FACE SUPERIOR (JANELAS DO ACENDEDOR E CÂMBIO) // Posiciona e vaza o retângulo superior dos botões/tomada 12V (100mm x 45mm) const sketchFuroBotoes = startSketchOnFace(consoleOco, "top") |> movePoint([ (largura - tamFuroBotoesX) / 2, comprimento - tamFuroBotoesY - 20 ]) |> lineTo([ (largura - tamFuroBotoesX) / 2 + tamFuroBotoesX, comprimento - tamFuroBotoesY - 20 ], %) |> lineTo([ (largura - tamFuroBotoesX) / 2 + tamFuroBotoesX, comprimento - 20 ], %) |> lineTo([ (largura - tamFuroBotoesX) / 2, comprimento - 20 ], %) |> close(%) const consoleComFuroBotoes = cut(sketchFuroBotoes, depth = espessura * 2) // Posiciona e vaza a janela quadrada da coifa do câmbio (100mm x 100mm) const sketchFuroCambio = startSketchOnFace(consoleComFuroBotoes, "top") |> movePoint([ (largura - tamFuroCambioX) / 2, 40 ]) // Afastamento de 40mm da borda conforme gabarito |> lineTo([ (largura - tamFuroCambioX) / 2 + tamFuroCambioX, 40 ], %) |> lineTo([ (largura - tamFuroCambioX) / 2 + tamFuroCambioX, 140 ], %) |> lineTo([ (largura - tamFuroCambioX) / 2, 140 ], %) |> close(%) const pecaFinal = cut(sketchFuroCambio, depth = espessura * 2)
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width, X | 215 mm | 50 – 400 |
| Overall length, Y | 235 mm | 50 – 400 |
| Overall height, Z | 115 mm | 20 – 300 |
| Wall / shell thickness | 2.5 mm | 1.2 – 6 |
| Cutout width, X | 100 mm | 10 – 200 |
| Cutout length, Y | 45 mm | 10 – 200 |
| Margin from rear edge | 20 mm | 0 – 80 |
| Cutout width, X | 100 mm | 10 – 200 |
| Cutout length, Y | 100 mm | 10 – 200 |
| Cutout start from front edge | 40 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no