Mercedes 190E Front End (No Headlights)

1 views

Bounding box: 184 × 43.5 × 86 mm
Engine: 3D Printing B-rep
Parameters: 17
Published: November 13, 2026

Download

Free to download and use. See the terms.

The prompt

just make the front bumper and make it or just make the whole front without the headlights

Parameters

Name	Value	Range
Overall width	180 mm	80 – 260
Depth of the front section	34 mm	15 – 80
Height of the hood front edge	72 mm	40 – 140
Height of the bumper top edge	38 mm	15 – 100
Front lip (splitter) thickness	7 mm	2 – 16
How far the lip juts forward	7 mm	0 – 25
Fog light recess diameter	24 mm	8 – 60
Fog light offset from centre	62 mm	0 – 120
Fog light height	20 mm	8 – 90
Grille width	92 mm	30 – 170
Grille height	24 mm	8 – 60
Grille bottom height	42 mm	10 – 110
Number of vertical slats	21 mm	3 – 49
Plate width	62 mm	20 – 120
Plate height	18 mm	8 – 40
Plate centre height	26 mm	10 – 90
Plate stand-off in front of bumper	8 mm	2 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS