Brackets and mounts
Medical Search and Rescue Drone - V4 Engineering Assembly
- Bounding box
- 620.0 × 444.0 × 216.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Reference-inspired parametric medical rescue quadcopter V4 with upper rescue housing and medical cross, internal electronics and battery mounting decks, hollow removable red medical case with lid, payload tray and divider, two case latches and hinges, four reinforced diagonal arms, four drilled motor mount plates, four motor housings, four tapered two-blade propellers, four integrated landing legs and feet, forward stereo camera bracket/lenses/hood and twin GPS-radio antennae. Separate named editable CAD components. Concept assembly only; dimensions and clearances require engineering validation.
Parameters
| Name | Value | Range |
|---|---|---|
| Motor centre offset | 190 mm | 165 – 220 |
| Arm width | 34 mm | 26 – 42 |
| Arm thickness | 24 mm | 18 – 30 |
| Motor housing diameter | 42 mm | 34 – 50 |
| Motor housing height | 42 mm | 32 – 52 |
| Propeller diameter | 240 mm | 200 – 280 |
| Propeller blade width | 22 mm | 16 – 28 |
| Upper housing length | 210 mm | 180 – 240 |
| Upper housing width | 170 mm | 145 – 200 |
| Upper housing height | 78 mm | 60 – 95 |
| Medical case length | 160 mm | 130 – 190 |
| Medical case width | 125 mm | 100 – 150 |
| Medical case height | 90 mm | 70 – 115 |
| Medical case wall thickness | 3 mm | 2 – 5 |
| Landing leg length | 95 mm | 70 – 120 |
| Motor bolt square spacing | 25 mm | 20 – 32 |
| Motor bolt hole diameter | 4.2 mm | 3.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl