MedAssist Pillbox Assembled with Supports

1 views

Bounding box: 186 × 110 × 70 mm
Engine: 3D Printing B-rep
Parameters: 69
Published: November 12, 2026

Download

Free to download and use. See the terms.

The prompt

bien, solo necesito que añadas los soportes para la impresion 3d, que se pueda despegar facil y no se dañe

Parameters

Name	Value	Range
Vertical gap for exploded view	0 mm	0 – 40
Outer length	180 mm	120 – 240
Outer width	110 mm	70 – 160
Base height	42 mm	20 – 60
Lid height	28 mm	12 – 45
Outer corner radius	6 mm	2 – 15
Base wall thickness	2.8 mm	1.2 – 5
Base floor thickness	3 mm	1.2 – 6
Compartment wall height	34 mm	15 – 40
Compartment width	34 mm	15 – 60
Compartment depth	34 mm	15 – 60
Gap between compartments	2.4 mm	1 – 6
Gap between compartment rows	6 mm	2 – 15
Monday-Thursday compartments	4 mm	1 – 6
Friday-Sunday compartments	3 mm	1 – 5
Technical chamber width	38 mm	20 – 70
Technical chamber depth	34 mm	15 – 60
Sound slot count	3 mm	1 – 6
Sound slot width	3 mm	1 – 8
Sound slot height	3 mm	1 – 8
M3 screw hole diameter	3.4 mm	2 – 6
Screw hole inset from wall	6 mm	3 – 15
USB-C opening width	12 mm	6 – 20
USB-C opening height	5 mm	3 – 10
USB-C opening center height	15 mm	5 – 35
Hinge knuckle offset	28 mm	10 – 60
Hinge knuckle diameter	8 mm	4 – 14
Hinge knuckle length	14 mm	6 – 30
Hinge pin hole diameter	2.5 mm	1.5 – 4
Lid side wall thickness	2.5 mm	1.2 – 5
Lid top thickness over RFID	1.8 mm	1.2 – 4
Screen active window width	73.44 mm	50 – 120
Screen active window height	48.96 mm	30 – 80
Screen PCB width	98 mm	60 – 140
Screen PCB height	56.34 mm	35 – 100
Screen PCB clearance	0.6 mm	0.2 – 2
Screen inner recess depth	0.8 mm	0.4 – 2
Screen support boss diameter	7 mm	4 – 12
Screen support boss height	6 mm	2 – 15
Screen boss inset	5 mm	2 – 12
Protoboard width	165 mm	80 – 200
Protoboard depth	55 mm	30 – 100
Protoboard support depth from lid top	10 mm	2 – 24
Protoboard support rib width	4 mm	2 – 10
Protoboard support shelf height	3 mm	1 – 8
RFID module X position	-60 mm	-90 – 0
RFID module Y position	30 mm	0 – 48
RFID module width	40 mm	20 – 70
RFID module depth	30 mm	15 – 60
RFID retaining wall thickness	2 mm	1 – 5
RFID retaining wall height	4 mm	1 – 10
Hinge cable passage width	14 mm	6 – 30
Hinge cable passage height	8 mm	3 – 16
Inner cover length	168 mm	100 – 190
Inner cover width	98 mm	50 – 120
Inner cover thickness	2.5 mm	1.2 – 5
Cover tab width	10 mm	4 – 20
Cover tab length	22 mm	8 – 40
Cable pass diameter	14 mm	6 – 30
Cable slot width	18 mm	6 – 40
Cable slot depth	6 mm	3 – 15
Cover screw inset	8 mm	3 – 20
Add break-away lid supports (1 yes, 0 no)	1 mm	0 – 1
Support clearance from side walls	8 mm	3 – 20
Support spacing along X	50 mm	20 – 100
Support spacing along Y	40 mm	20 – 100
Support base diameter	10 mm	4 – 20
Support contact tip diameter	4 mm	2 – 10
Break-away tip height	1.5 mm	0.5 – 3

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS