Brackets and mounts
Mechanical Triangular Mounting Bracket
- Bounding box
- 241.4 × 179.6 × 26 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a mechanical triangular mounting bracket in millimeter scale. The top main cylindrical boss has an outer diameter of 77.56 mm (D6), a central through-hole of 26.00 mm (D4), and a circular pattern of 8 (N) smaller holes of diameter 9.37 mm (D3) on a pitch circle diameter of 49.40 mm (D5). Two bottom cylindrical bosses are placed symmetrically at an angle of 33 degrees (A1), each with an outer diameter of 23.64 mm (D1) and an inner through-hole of 47.27 mm (D2). The three bosses are connected by a central web plate of thickness 20.00 mm (E1), bounded by outer radius 140.80 mm (R2) and inner cutout radius 55.29 mm (R3). Add two structural ribs of width 5.00 mm (L1) connecting the top boss to the bottom bosses with fillet radii of 6.00 mm (R1).
Parameters
| Name | Value | Range |
|---|---|---|
| Top boss outer diameter D6 | 77.56 mm | 40 – 120 |
| Top boss central through-hole D4 | 26 mm | 10 – 60 |
| Small hole diameter D3 | 9.37 mm | 3 – 20 |
| Small hole pitch circle diameter D5 | 49.4 mm | 20 – 110 |
| Number of small holes | 8 mm | 4 – 16 |
| Bottom boss dimension D1 | 23.64 mm | 10 – 80 |
| Bottom boss dimension D2 | 47.27 mm | 20 – 100 |
| Bottom boss placement angle A1 | 33 deg | 10 – 80 |
| Web plate thickness E1 | 20 mm | 5 – 50 |
| Web outer radius R2 | 140.8 mm | 60 – 250 |
| Web inner cutout radius R3 | 55.29 mm | 20 – 150 |
| Rib width L1 | 5 mm | 2 – 20 |
| Rib fillet radius R1 | 6 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
