Enclosures and housings
Mechanical Stand with Rectangular Socket
- Bounding box
- 100 × 50 × 28 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
3D Printable Mechanical Stand – Final Design Create a precise, 3D-printable mechanical stand consisting of a rectangular base with a centrally positioned raised rectangular socket designed to hold a long rectangular pole. 1. Rectangular Base Shape: Rectangular prism. Length: 100 mm (10 cm). Width: 50 mm (5 cm). Height/thickness: 8 mm (0.8 cm). The base must have flat top and bottom surfaces. The socket must be positioned at the exact centre of the base. 2. Central Socket / Projection Shape: Rectangular hollow projection. Outer length: 21 mm. Outer width: 11 mm. Height above the base: 20 mm. The projection must be vertically aligned and firmly integrated with the base. The projection must be a single continuous solid with the base. 3. Rectangular Pocket Inner opening length: 15 mm (1.5 cm). Inner opening width: 5 mm (0.5 cm). Pocket depth: 20 mm (2 cm). Wall thickness: 3 mm (0.3 cm) on all four sides. The pocket must be open at the top. The pocket must extend vertically downward into the projection. The pocket must have a flat bottom. The pocket must be designed to accommodate and securely hold a longer rectangular pole. Ensure the internal dimensions are accurate and the pocket walls are uniform. 4. 3D Printing Requirements Create a watertight, manifold, 3D-printable model. The base and socket must form one continuous solid body. Avoid unnecessary overhangs and unsupported structures. Maintain clean geometric surfaces and sharp edges. Ensure the socket is suitable for FDM 3D printing. Export the final model as an STL file. 5. Final Design Description The finished model should resemble a flat rectangular pedestal measuring 100 mm × 50 mm × 8 mm, with a centrally positioned rectangular socket measuring 21 mm × 11 mm × 20 mm above the base. The socket must have a 15 mm × 5 mm internal opening, 3 mm thick outer walls, and a 20 mm deep pocket. The overall height of the component should be 28 mm (2.8 cm). Ensure all dimensions are accurate and expressed in millimetres. Do not add any extra holes, supports, decorations, or unnecessary features.
Parameters
| Name | Value | Range |
|---|---|---|
| Base length | 100 mm | 20 – 200 |
| Base width | 50 mm | 10 – 150 |
| Base thickness | 8 mm | 3 – 30 |
| Socket outer length | 21 mm | 10 – 80 |
| Socket outer width | 11 mm | 5 – 60 |
| Socket height above base | 20 mm | 5 – 80 |
| Pocket inner length | 15 mm | 4 – 70 |
| Pocket inner width | 5 mm | 2 – 50 |
| Pocket depth from socket top | 20 mm | 2 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no