3D preview of Mechanical Rocker Bracket
Loading the interactive model…
Interactive 3D model of Mechanical Rocker Bracket

Brackets and mounts

Mechanical Rocker Bracket

1 views
Bounding box
169.0 × 143.8 × 41 mm
Engine
3D Printing B-rep
Parameters
18
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Create a mechanical rocker bracket in millimeters on the XY plane. 1. Top main hub centered at (0, 0): outer diameter 62.64 mm (D6), extruded symmetrically in Z with total thickness 37.00 mm (E2=17 mm up, E3=20 mm down). Cut a central through-hole of diameter 21.00 mm (D4). Create a circular pattern of 6 through-holes (N=6) of diameter 7.57 mm (D3) arranged evenly on a pitch circle diameter of 39.90 mm (D5). 2. Two symmetric lower arms extending downward from (0, 0) at angles of ±35.00 degrees (A1) from the vertical negative Y-axis, at a radial distance of 114.00 mm (R4) from the origin. 3. Left and right lower bosses at the ends of the arms: outer diameter 38.18 mm (D2), extruded to a total thickness of 40.00 mm (E4=21 mm up, E5=19 mm down), with central through-holes of diameter 19.09 mm (D1). 4. Connecting plate and ribs: connect the top hub and the two lower bosses with a central web of thickness 17.00 mm (E1). The outer contour arcs have radius 125.40 mm (R2) and the inner cutout arc between the lower bosses has radius 55.56 mm (R3). Add stiffening ribs of width 11.00 mm (L1) connecting the top hub to each lower boss, with fillet radius 9.00 mm (R1) at the transitions. 5.

Parameters

NameValueRange
Top hub outer diameter62.64 mm20 – 200
Top hub height above XY17 mm1 – 100
Top hub depth below XY20 mm1 – 100
Central through-hole diameter21 mm3 – 100
Pattern hole count6 mm2 – 24
Pattern hole diameter7.57 mm1 – 50
Pattern pitch circle diameter39.9 mm5 – 150
Arm angle from -Y35 deg0 – 80
Boss radial distance114 mm10 – 300
Lower boss outer diameter38.18 mm5 – 150
Lower boss height above XY21 mm1 – 100
Lower boss depth below XY19 mm1 – 100
Lower boss hole diameter19.09 mm3 – 100
Web/rib thickness17 mm1 – 100
Outer contour arc radius125.4 mm10 – 500
Inner cutout arc radius55.56 mm5 – 300
Rib width11 mm2 – 50
Rib fillet radius9 mm1 – 50

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Mechanical Rocker Bracket - Free CAD Model (STEP, STL) | TextoCAD