Enclosures and housings
Mechanical Gyroscope Desk Sculpture
- Bounding box
- 50 × 60 × 57 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- October 31, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a precise 3D-printable non-electronic Mechanical Gyroscope Desk Sculpture as a closed-manifold solid assembly matching the 3-axis orientation of the reference image. Center sphere is 30mm diameter with a 10mm vertical Z-axis through-bore. Inner gimbal ring is 32mm ID, 40mm OD, 10mm height, with opposing 3mm pivot pin sockets along the X-axis (0 and 180 degrees). Middle gimbal ring is 42mm ID, 50mm OD, 10mm height, rotated 90 degrees relative to the inner ring with opposing 3mm pivot pin sockets along the Y-axis (90 and 270 degrees). Outer base ring is 52mm ID, 60mm OD, 10mm height, with a flattened bottom face for desk stability. Maintain 1.0mm radial air gaps between all nested components and 0.1mm fit clearance on all 2.8mm pivot pins. All outer edges have 0.5mm chamfers with smooth high-polygon curves and zero internal wiring or electronics.
Parameters
| Name | Value | Range |
|---|---|---|
| Center sphere diameter | 30 mm | 12 – 60 |
| Vertical Z through-bore diameter | 10 mm | 3 – 20 |
| Bore edge chamfer | 0.5 mm | 0.2 – 2 |
| Inner gimbal ring outer diameter | 40 mm | 20 – 90 |
| Inner gimbal ring inner diameter | 32 mm | 16 – 80 |
| Middle gimbal ring outer diameter | 50 mm | 24 – 100 |
| Middle gimbal ring inner diameter | 42 mm | 20 – 90 |
| Outer base ring outer diameter | 60 mm | 28 – 120 |
| Outer base ring inner diameter | 52 mm | 24 – 110 |
| Ring thickness / height | 10 mm | 4 – 20 |
| Chamfer on ring outer edges | 0.5 mm | 0.2 – 2 |
| Pivot pin diameter | 2.8 mm | 1.5 – 5 |
| Pivot pin end chamfer | 0.4 mm | 0.1 – 1 |
| Pivot socket diameter | 3 mm | 1.5 – 6 |
| Pivot socket depth | 3 mm | 1 – 6 |
| Flattened bottom face cut | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no