Enclosures and housings
Marvel Air Flow MAF03C Blower MR-625 — Organicco GA Assembly
- Bounding box
- 2163.5 × 1670.1 × 1874.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Reconstruct uploaded Marvel Air Flow GA drawing MR-625 Rev00 for Organicco: belt-driven centrifugal blower ARR#1A CW, 7500 CMH, 500 mmWC @250C, 1600 RPM fan, 50HP 1465 RPM motor. Base 1900x892 channel 125x65, suction Ø400 ID, 500 OD round flange 12×Ø14 PCD456, vertical 410 SQ outlet flange 510SQ 12×Ø14, 8×Ø17 foundation locations, fan centre 1450 from base start and +850 above base. Components: scroll volute, impeller, inlet damper, shaft and dual bearing housings, motor and sheaves, four wedge belts & guard, lifting lugs, inspection hatch, drain.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall base length | 1900 mm | 1800 – 2000 |
| Overall base width | 892 mm | 850 – 950 |
| Foundation C channel height | 125 mm | 115 – 135 |
| Foundation channel nominal width | 65 mm | 55 – 80 |
| Blower centre x from base start | 1450 mm | 1370 – 1530 |
| Blower shaft height above floor | 975 mm | 925 – 1000 |
| Impeller diameter (illustrative) | 980 mm | 900 – 1050 |
| Impeller blade count (illustrative) | 10 | 8 – 12 |
| Fan casing axial width | 558 mm | 530 – 580 |
| Scroll shell nominal radius | 640 mm | 600 – 700 |
| Sheet thickness (illustrative) | 6 mm | 4 – 10 |
| Inlet clear diameter | 400 mm | 390 – 415 |
| Inlet flange outer diameter | 500 mm | 485 – 520 |
| Inlet flange PCD | 456 mm | 445 – 465 |
| Inlet axial projection (representative) | 400 mm | 330 – 450 |
| Outlet square clear aperture | 410 mm | 400 – 425 |
| Outlet square flange OD | 510 mm | 500 – 530 |
| Outlet flange mounting height from floor | 1856 mm | 1800 – 1900 |
| Motor axis X from base end | 370 mm | 290 – 450 |
| Motor axis height above floor | 320 mm | 290 – 380 |
| 50 HP motor body diameter (estimated) | 350 mm | 330 – 400 |
| Motor body length (estimated) | 450 mm | 400 – 520 |
| Fan sheave diameter (estimated) | 340 mm | 310 – 380 |
| Motor sheave diameter (estimated) | 280 mm | 245 – 330 |
| Belt guard offset | 18 mm | 12 – 30 |
| Flange bolt hole diameter | 14 mm | 14 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,