Makita 18V LXT Battery Wall Mount

Product Spec Sheet: Makita 18V LXT Vertical Drop-In Battery Wall Mount (Single Bay)Core Function & Target AudienceProduct Concept: A rugged, standalone single-bay wall mount for Makita 18V LXT batteries featuring a secure top-drop insertion slot and active locking catch engagement.Target Audience: Woodworkers, contractors, and DIYers looking to clean up workbench clutter and organize battery storage on van walls, workshop French cleats, or timber studs.Exact Dimensions & TolerancesMakita 18V LXT Battery Reference Dimensions: $113\text{ mm (L)} \times 75\text{ mm (W)} \times 62\text{ mm (H)}$ (standard physical profile for variants like the BL1850B 5.0Ah).Interface Tolerances: Slide rail width designed at $40.6\text{ mm}$ ($+0.6\text{ mm}$ CAD clearance over the standard $40\text{ mm}$ battery slide tower rail) to ensure a smooth, rattle-free vertical drop-in without binding.Mounting Backplate: $50\text{ mm} \times 90\text{ mm}$ footprint with two countersunk screw holes sized for standard #8 or M4 wood screws.Wall Thickness: $4\text{ mm}$ solid perimeters throughout the core structural body to prevent flex under the weight of heavy-capacity packs.Printability Notes (Bambu A1 Optimized)Material: PETG recommended for impact resistance and slight flex; high-toughness PLA is a solid alternative.Orientation: Print flat on its rear mounting plate face against the build plate. This ensures the layer lines run parallel to the pulling force of the battery, maximizing mechanical strength on the slide rails.Supports: Zero supports required if designed with a self-supporting 45-degree chamfer on the underside of the rails.Settings: 4 wall loops/perimeters, 25% Gyroid or Grid infill for optimal strength-to-print-time ratio.Ready-to-Use CAD PromptDesign a 3D-printable single-bay wall mount for Makita 18V LXT batteries (referencing a battery body profile of 113mm x 75mm x 62mm). The battery must drop straight down from above into a vertical slot with a secure retaining lip. Dimensions: base mounting plate 50mm wide by 90mm high with two countersunk screw holes for M4/No.8 screws. The slide rail interface must be 40.6mm wide with a 0.6mm clearance tolerance over the standard 40mm battery rail for a smooth fit. Design the model to be printed flat on its rear mounting face with a solid 4mm wall thickness, 4 perimeters, and zero required supports.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.