Magnetic modular phone stand (updated with holder)

1 views

Bounding box: 143 × 137.7 × 175.4 mm
Engine: 3D Printing B-rep
Parameters: 23
Published: November 12, 2026

Download

Free to download and use. See the terms.

The prompt

make it like the pic i sent u

Parameters

Name	Value	Range
Base width	110 mm	80 – 160
Base depth	90 mm	70 – 140
Base height	12 mm	6 – 20
Front lip height	14 mm	6 – 25
Front lip depth	12 mm	6 – 20
Backrest angle from horizontal	72 deg	65 – 80
Backrest length along slope	95 mm	80 – 160
Wall / corner radius factor	4 mm	2 – 8
Cable notch width	14 mm	8 – 24
Under-base cable channel depth	3 mm	1 – 6
Magnet diameter	8 mm	4 – 15
Magnet thickness	3 mm	1 – 5
Magnet pocket clearance	0.2 mm	0.1 – 0.5
Magsafe charging hole diameter	10 mm	6 – 20
Top plate thickness	4 mm	2 – 8
Top plate inset from side walls	2 mm	0 – 5
Second magnet diameter	8 mm	4 – 15
Second magnet thickness	3 mm	1 – 5
Second magnet pocket clearance	0.2 mm	0.1 – 0.5
Holder depth	30 mm	10 – 80
Holder width	50 mm	20 – 120
Holder thickness	4 mm	2 – 10
Overlap with backrest	0.6 mm	0 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS