Enclosures and housings
Magnetic Drift Pad Enclosure - Exploded Parts
- Bounding box
- 1520.0 × 260.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a Hot Wheels magnetic drift pad, assembled size 300 × 250 × 100 mm. Make TWO separate enclosure halves, each 150 × 250 × 100 mm. They must slide/snap-lock together along the 150 mm center joint. When connected, they must form ONE continuous open box with no internal wall, divider, ridge, or obstruction at the joint. Create a rectangular removable TOP COVER covering the full 300 × 250 mm assembled box. Because of the Bambu A1 256 mm limit, split the top into TWO 150 × 250 mm plates that mechanically slide/snap together and form one flat continuous top with no visible raised joint. Create ONE separate circular rotating disc, exactly 200 mm diameter and 5 mm thick, positioned underneath the top. Add a central motor hub No screws, bolts, nuts, or glue. Use slide-fit/dovetail joints and snap-locks. Use practical FDM clearances. All four main printable parts must be separate CAD bodies: left enclosure, right enclosure, left top plate, right top plate, plus the separate 200 mm rotating disc. Every part must fit within 256 × 256 × 256 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 300 mm | 250 – 600 |
| Enclosure Half Width (X) | 150 mm | 80 – 256 |
| Enclosure Depth (Y) | 250 mm | 150 – 256 |
| Enclosure Height (Z) | 100 mm | 40 – 256 |
| Enclosure Wall Thickness | 2 mm | 1 – 6 |
| Enclosure Dovetail Depth | 5 mm | 2 – 10 |
| Enclosure Dovetail Width | 30 mm | 10 – 60 |
| Enclosure Dovetail Taper | 1 mm | 0 – 3 |
| Enclosure Dovetail Height | 12 mm | 5 – 40 |
| Enclosure Snap Tab Width | 12 mm | 5 – 30 |
| Enclosure Snap Tab Depth | 4 mm | 2 – 10 |
| Enclosure Snap Tab Height | 16 mm | 5 – 40 |
| Top Plate Width (X) | 150 mm | 80 – 256 |
| Top Plate Depth (Y) | 250 mm | 150 – 256 |
| Top Plate Thickness | 5 mm | 2 – 10 |
| Top Dovetail Depth | 5 mm | 2 – 10 |
| Top Dovetail Width | 30 mm | 10 – 60 |
| Top Dovetail Taper | 1 mm | 0 – 3 |
| Top Snap Tab Width | 10 mm | 5 – 30 |
| Top Snap Tab Depth | 4 mm | 2 – 10 |
| Top Snap Tab Height | 5 mm | 2 – 10 |
| FDM Clearance | 0.2 mm | 0.1 – 0.5 |
| Disc Diameter | 200 mm | 100 – 256 |
| Disc Thickness | 5 mm | 2 – 10 |
| Disc Center Hole Diameter | 20 mm | 5 – 60 |
| Magnet Mount Hole Diameter | 5 mm | 2 – 10 |
| Magnet Mount Count | 6 mm | 1 – 12 |
| Magnet Mount Circle Diameter | 80 mm | 40 – 180 |
| Motor Hub Diameter | 20 mm | 5 – 40 |
| Motor Hub Height | 10 mm | 5 – 30 |
| Motor Shaft Hole Diameter | 6 mm | 3 – 20 |
| Motor Shaft Flat Width | 5.5 mm | 2 – 15 |
| Hub Snap Lip Diameter | 16 mm | 5 – 30 |
| Hub Snap Lip Height | 3 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no