Enclosures and housings
Magnetic Drift Pad Assembly
- Bounding box
- 300.0 × 256.0 × 107.5 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 300 × 250 × 100 mm Hot Wheels magnetic drift pad for Bambu Lab A1. * Split the main box into TWO separate 150 × 250 × 100 mm halves. * Join the halves with a strong slide-in tongue-and-groove joint, alignment pins, and an external snap lock. * Joint must create NO internal wall, divider, ridge, step, or obstruction; the assembled interior must be completely open. * Create one separate 200 mm diameter × 5 mm thick rotating disc with a central motor hub. **NO magnet pockets or holes on the disc.** * Create a removable 300 × 250 mm top cover split into TWO 150 × 250 mm plates. * Top plates must align into one perfectly flat surface and attach to the box using removable screws and integrated perimeter screw bosses. * Keep every printable part within 256 × 256 × 256 mm and use practical FDM clearances.
Parameters
| Name | Value | Range |
|---|---|---|
| Half Box Length | 150 mm | 50 – 200 |
| Box Width | 250 mm | 50 – 300 |
| Box Height | 100 mm | 30 – 200 |
| Wall Thickness | 8 mm | 3 – 15 |
| Tongue/Groove Depth | 4 mm | 1 – 10 |
| Tongue/Groove Width | 4 mm | 1 – 10 |
| Joint Clearance | 0.2 mm | 0 – 1 |
| Alignment Pin Diameter | 6 mm | 2 – 10 |
| Pin Hole Clearance | 0.2 mm | 0 – 1 |
| Pin Length | 20 mm | 10 – 40 |
| Pin Hole Depth per Half | 10 mm | 5 – 30 |
| Pin Y Position 1 | 40 mm | 20 – 120 |
| Pin Y Position 2 | 110 mm | 60 – 180 |
| Pin Y Position 3 | 180 mm | 120 – 220 |
| Pin Y Position 4 | 220 mm | 150 – 240 |
| Disc Diameter | 200 mm | 50 – 250 |
| Disc Thickness | 5 mm | 2 – 10 |
| Hub Diameter | 40 mm | 10 – 60 |
| Hub Height | 20 mm | 5 – 40 |
| Disc Center X | 150 mm | 100 – 200 |
| Disc Center Y | 125 mm | 50 – 200 |
| Disc Center Z | 20 mm | 10 – 90 |
| Top Plate Length | 150 mm | 50 – 200 |
| Top Plate Width | 250 mm | 50 – 300 |
| Top Plate Thickness | 5 mm | 2 – 10 |
| Edge Lap Lip Width | 5 mm | 2 – 15 |
| Screw Diameter | 3 mm | 2 – 6 |
| Screw Hole Clearance | 0.2 mm | 0 – 1 |
| Screw Head Diameter | 6.3 mm | 4 – 10 |
| Screw Head Height | 2 mm | 1 – 5 |
| Screw Length | 10 mm | 5 – 20 |
| Boss Diameter | 8 mm | 5 – 20 |
| Boss Height | 10 mm | 5 – 20 |
| Snap Tab Width | 14 mm | 5 – 30 |
| Snap Tab Depth | 6 mm | 2 – 15 |
| Snap Tab Height | 15 mm | 5 – 30 |
| Snap Catch Width | 12 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no