Enclosures and housings
Machined Block with Pocket, Cable Bay, and Pin Holes
- Bounding box
- 154.9 × 240.0 × 16.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
1. Create a base rectangular solid block: 154.9mm wide, 240mm long, and 16mm tall. 2. Subtract a rectangular pocket from the top face: The pocket must be 138.9mm wide, 209.3mm long, and 7.4mm deep. Align this pocket so there is exactly an 8mm solid border on the left, an 8mm solid border on the right, and an 11.7mm solid border at the top edge. 3. Subtract a cable bay tunnel: Create a cutout at the bottom edge that is 138.9mm wide and 19mm long, extending completely through the 16mm height of the block to connect with the bottom of the pocket. 4. Subtract pin holes on the left wall: On the outer left side face, cut 5 evenly spaced circular holes along the centerline. Each hole must be 4.8mm in diameter and 7.5mm deep. 5. Subtract pin holes on the right wall: On the outer right side face, cut 5 evenly spaced circular holes along the centerline. Each hole must be 4.8mm in diameter and 7.5mm deep. 6. Subtract an extraction hole: Cut a 20mm diameter circular hole completely through the center of the pocket's floor.
Parameters
| Name | Value | Range |
|---|---|---|
| Block width | 154.9 mm | 100 – 300 |
| Block length | 240 mm | 150 – 500 |
| Block height | 16 mm | 8 – 40 |
| Pocket width | 138.9 mm | 100 – 250 |
| Pocket length | 209.3 mm | 150 – 400 |
| Pocket depth | 7.4 mm | 1 – 15 |
| Left border | 8 mm | 0 – 30 |
| Right border | 8 mm | 0 – 30 |
| Top border | 11.7 mm | 0 – 30 |
| Cable bay length | 19 mm | 5 – 40 |
| Pin hole diameter | 4.8 mm | 2 – 8 |
| Pin hole depth | 7.5 mm | 2 – 15 |
| Number of pin holes per side | 5 | 1 – 10 |
| Extraction hole diameter | 20 mm | 5 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox