Enclosures and housings
MacBook + iPad + iPhone Desk Stand
- Bounding box
- 447.4 × 130.0 × 521.6 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
DEVICE ARRANGEMENT IS ABSOLUTELY CRITICAL: The MacBook sits normally on the desk in front of the stand. The iPad is positioned ABOVE the MacBook DISPLAY, centered approximately over the MacBook display. The iPhone is positioned DIRECTLY TO THE RIGHT of the MacBook DISPLAY, at approximately the SAME VERTICAL LEVEL as the MacBook display. Visual target: [ iPad ] [ ] [ MacBook DISPLAY ][ iPhone ] The iPad must be ABOVE the MacBook display, NOT beside it. The iPhone must be BESIDE the MacBook display, NOT above it and NOT behind it. The iPhone TOP EDGE should align with the TOP EDGE of the MacBook display. The iPhone LEFT EDGE should align as closely as possible with the RIGHT EDGE of the MacBook display. The iPhone position must therefore be independently adjustable horizontally and vertically. The MacBook itself is completely independent of the stand and carries NO load from either device. The iPad and iPhone are both supported entirely by the stand. The stand must remain behind the MacBook and must not interfere with opening or closing the MacBook lid.
Parameters
| Name | Value | Range |
|---|---|---|
| MacBook Width | 312.6 mm | 180 – 400 |
| MacBook Depth | 221.2 mm | 150 – 350 |
| Display Top Edge Height | 210 mm | 150 – 300 |
| Stand Setback Behind MacBook | 100 mm | 20 – 250 |
| Gap: Display Top to iPad Bottom | 10 mm | 0 – 40 |
| iPhone Horizontal Offset | 0 mm | -60 – 120 |
| iPhone Vertical Offset | 0 mm | -60 – 60 |
| iPad Width (portrait) | 215.5 mm | 140 – 320 |
| iPad Height (portrait) | 281.6 mm | 180 – 360 |
| iPhone Width | 76.7 mm | 55 – 110 |
| iPhone Height | 159.9 mm | 110 – 200 |
| Base Plate Depth | 110 mm | 60 – 200 |
| Base Plate Thickness | 10 mm | 4 – 25 |
| Post Width | 90 mm | 40 – 160 |
| Post Depth | 60 mm | 30 – 120 |
| Cradle Ledge Depth | 30 mm | 15 – 60 |
| Cradle Ledge Thickness | 8 mm | 4 – 20 |
| Retaining Lip Height | 18 mm | 4 – 40 |
| Retaining Lip Thickness | 5 mm | 3 – 12 |
| Base Corner Radius | 6 mm | 0 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no