Enclosures and housings
M10x1.5 Threaded Locating Disk
- Bounding box
- 101.6 × 101.6 × 40.3 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Fix the existing model because the M10 internal thread is not visible: the current helical groove cut appears to have made no change to the pilot bore. Rebuild the internal thread as a real, clearly visible continuous helical M10 x 1.5 metric internal thread cut into the wall of the blind hole, 25 mm deep from the top face. Verify the thread groove is actual geometry and not cosmetic lines. Preserve all existing dimensions and features: disk diameter 101.6 mm, body height 33.3 mm, M10 hole center offset 31.8 mm, M10x1.5 internal thread, blind hole depth 25 mm, top and bottom outer rim roundover R0.8 mm, and integral locating pin diameter 3.2 mm projecting 7 mm from top, pin center 8.5 mm from M10 hole center along same radial direction. The model must contain visible helical thread grooves and remain a valid solid suitable for STEP and STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Disk Diameter | 101.6 mm | 40 – 200 |
| Body Height | 33.3 mm | 10 – 80 |
| Hole Center Offset | 31.8 mm | 0 – 40 |
| Outer Rim Roundover | 0.8 mm | 0.2 – 2 |
| Thread Nominal Diameter | 10 mm | 4 – 20 |
| Thread Pitch | 1.5 mm | 0.5 – 3 |
| Blind Hole Depth | 25 mm | 8 – 32 |
| Thread Flank Angle (included) | 60 deg | 30 – 80 |
| Print Clearance | 0.1 mm | 0 – 0.4 |
| Locating Pin Diameter | 3.2 mm | 1 – 8 |
| Locating Pin Height | 7 mm | 1 – 20 |
| Pin Distance From Hole Center | 8.5 mm | 3 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no