Brackets and mounts
Low-Profile Rotating Cam Button Assembly
- Bounding box
- 19.0 × 19.0 × 4.5 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
1. CORE MECHANISM CONCEPT - Action: Central spreader bar pushes compliant clip legs radially outward -> legs ride along expanding spiral cam walls -> button spins 90° -> legs snap into drop-off lock pockets. - Key Rule: Round/symmetrical walls create zero spin torque. Walls MUST expand outward in radius along a spiral path to force rotation. 2. TARGET DIMENSIONS & ANGLES - Outer Button Diameter: 16 mm – 20 mm (gives outer torque leverage while staying clothing-sized) - Total Stack Height: 4.0 mm – 5.5 mm (low-profile, flush against fabric) - Center Pivot Boss: 2.5 mm – 3.5 mm diameter (prevents side-wobble during spin) - Cam Wall / Ramp Angle: 35° – 45° constant tangent angle (below 30° stalls from friction; above 55° is too hard to push) - Spiral Radial Expansion: 1.5 mm – 2.5 mm increase in inner radius over a 90° arc - Lock Pocket Step: 0.8 mm – 1.2 mm crisp radial drop-off at the end of the 90° spiral - Running Clearance: 0.35 mm – 0.50 mm gap between moving parts & clip channel width 3. CRITICAL CAD FIXES (ANTI-JAMMING) - Continuous Spiral Path: Replace multi-faceted lofts/steps with one smooth logarithmic or Archimedean spiral curve from entry to lock pocket. - Fillet Sharp Corners: Add 0.5 mm – 1.0 mm fillets to all interior corners, tooth tips, and spreader edges so the clip slides instead of biting. - Widen Pinch Points: Ensure the channel between the central spreader bar and inner cam wall is at least 0.4 mm – 0.6 mm wider than the clip leg thickness. - Lead-In Chamfers: Bevel the top entry edges where the compliant clip first touches down so it never catches flat.
Parameters
| Name | Value | Range |
|---|---|---|
| Base OD | 19 mm | 16 – 24 |
| Base Disc Thickness | 1.2 mm | 0.8 – 2 |
| Cam Wall Height | 1.5 mm | 1 – 2.5 |
| Spiral Start Radius | 6 mm | 5 – 7.5 |
| Spiral Radial Expansion | 2 mm | 1.5 – 2.5 |
| Spiral Wall Thickness | 1.5 mm | 1 – 2 |
| Lock Pocket Depth | 1 mm | 0.8 – 1.2 |
| Lock Pocket Width | 1 mm | 0.8 – 1.5 |
| Interior Fillet Radius | 0.5 mm | 0.3 – 0.8 |
| Pivot Hole Diameter | 3.5 mm | 3.2 – 4.5 |
| Button Cap OD | 18 mm | 16 – 20 |
| Button Cap Height | 1.8 mm | 1.2 – 2.5 |
| Underside Slot Depth | 0.8 mm | 0.4 – 1.2 |
| Pivot Boss Diameter | 3 mm | 2.5 – 3.5 |
| Pivot Boss Height | 4.5 mm | 4 – 5.5 |
| Pivot Top Chamfer | 0.5 mm | 0.3 – 0.8 |
| Spreader Bar Length | 8 mm | 6 – 10 |
| Spreader Bar Width | 1.2 mm | 1 – 1.8 |
| Spreader Bar Thickness | 1 mm | 0.8 – 1.4 |
| Spreader End Fillet | 0.5 mm | 0.3 – 0.6 |
| Clip Leg Length | 6 mm | 4 – 8 |
| Clip Leg Thickness | 1 mm | 0.8 – 1.4 |
| Clip Leg Height | 1.2 mm | 0.8 – 1.6 |
| Running Clearance | 0.5 mm | 0.35 – 0.6 |
| Leg Tip Fillet | 0.4 mm | 0.3 – 0.6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
