Enclosures and housings
Low-observable model body
- Bounding box
- 300.0 × 72.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create only the body of a fictional non-functional low-observable aerospace desktop display model. Use millimeters. Use X for length, Y for width, and Z for height. The nose is at the front along X. Do not create wings or tail fins. Make one symmetric faceted closed body: - length 300 mm - maximum width 72 mm - maximum height 40 mm - narrow polygonal nose - gradual widening front section - broad center section - short tapered closed tail - flat lower surface Build the body from two overlapping closed XY polygons extruded along Z: a 24 mm lower body and a smaller 16 mm upper deck centered on top. Use only polygon extrusion and boolean union. Do not use loft, sweep, revolve, shell, fillet or chamfer. Produce one watertight solid with no openings or internal parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 300 mm | 200 – 500 |
| Maximum Width | 72 mm | 40 – 120 |
| Lower Body Height | 24 mm | 10 – 40 |
| Upper Deck Height | 16 mm | 5 – 30 |
| Nose Length Ratio | 0.35 | 0.1 – 0.5 |
| Tail Length Ratio | 0.15 | 0.05 – 0.4 |
| Deck Scale Factor | 0.6 | 0.3 – 0.9 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox