Enclosures and housings
LoRa Remote Enclosure Assembly
- Bounding box
- 123.0 × 65.5 × 28.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- September 11, 2026
Download
Free to download and use. See the terms.
The prompt
add a case to fit these parts (use holes when needed for ventilation and walls when needed) Heltec WiFi LoRa 32 V3 board (868 MHz) — ~£18–22 (includes the 0.96" OLED screen built onto the board, no extra cost) 3.7V 1100mAh LiPo battery (JST-1.25mm connector) — ~£5–7 3D-printed enclosure with a physical power switch cutout — ~£3–8 in filament if printing yourself, or ~£10–15 if using a print service USB-C cable (for charging/flashing) — ~£2–3 if you don't already have one with a power button on the side 5-Way Navigation Cluster: A directional layout featuring Up, Down, Left, and Right buttons centered around an OK button, with a separate Back button positioned further away on the remote or controller interface to prevent accidental presses. make sure the back button so one button should be a little further away fomr the "dpad"
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Length | 120 mm | 100 – 150 |
| Enclosure Width | 65 mm | 50 – 80 |
| Enclosure Height | 25 mm | 20 – 35 |
| Wall Thickness | 2 mm | 1 – 4 |
| Faceplate Thickness | 3 mm | 2 – 5 |
| Board Length | 51 mm | 40 – 60 |
| Board Width | 26 mm | 20 – 35 |
| Board Thickness | 2 mm | 1 – 4 |
| OLED Width | 25 mm | 20 – 30 |
| OLED Height | 15 mm | 10 – 20 |
| Battery Length | 60 mm | 50 – 70 |
| Battery Width | 35 mm | 30 – 40 |
| Battery Thickness | 8 mm | 5 – 12 |
| Button Diameter | 8 mm | 5 – 12 |
| Button Spacing | 15 mm | 10 – 20 |
| Back Button Offset | 25 mm | 15 – 40 |
| Switch Length | 10 mm | 5 – 15 |
| Switch Width | 6 mm | 4 – 10 |
| USB-C Width | 8.5 mm | 6 – 12 |
| USB-C Height | 3 mm | 2 – 5 |
| Vent Hole Diameter | 3 mm | 2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w