Enclosures and housings
Locking Block Assembly
- Bounding box
- 88.0 × 55.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a 3D solid model based strictly on primitive shapes, coordinates, and boolean operations aligned to origin (0,0,0): 1. BASE BLOCK (Union): A solid rectangular cuboid with X spanning from +10.0mm to -78.0mm, Z spanning from -20.0mm to +20.0mm, and Y spanning from -15.0mm to +25.0mm. 2. CENTRAL BORE (Subtraction): A continuous cylindrical hole along the X-axis from X = +50mm to -100mm with a constant diameter of 6.70mm. 3. FORWARD CYLINDER RECESS (Subtraction): A coaxial cylinder along the X-axis from X = 0 to X = -17.02mm with a diameter of 25.27mm. 4. CHAMFER CUT (Subtraction): A 45-degree angled cut applied at X = -2.0mm positioned in the positive-Z and positive-Y quadrant. 5. CENTRAL OPEN CHANNEL (Subtraction): A rectangular box cutout, width 28.00mm (Z from -14mm to +14mm), height 30mm, extending along the X-axis from X = -17.02mm to -78.0mm, open to the top and rear faces. 6. SIDE TRACK RECESSES (Subtraction): Two horizontal rectangular slots, each 4.00mm wide and 2.00mm deep, cut into the internal left and right interior side walls of the central open channel along the X-axis. 7. TRANSVERSE PIN HOLE (Subtraction): A cylindrical through-hole parallel to the Z-axis with a diameter of 6.35mm, centered at coordinates X = -61.47mm and Y = -5.0mm. 8. ANGLED FLAT CUT (Subtraction): A planar wedge cut tilted at 11.5 degrees forward relative to the Y-axis, intersecting the interior of the central channel at X = -61.47mm. 9. DUAL CONICAL POCKETS (Subtraction): Two identical conical cutters with an 8.0mm base diameter and a 32-degree taper, positioned at X = -17.02mm and Y = -3.0mm, offset at Z = -4.0mm and Z = +4.0mm. 10. PARALLEL CLEARANCE TUNNEL (Subtraction): A straight, uniform cylindrical tunnel parallel to the X-axis from X = -100mm to +50mm at Y = +25.00mm, Z = 0, with a constant diameter of 11.0mm throughout its entire length (zero taper, zero draft angle, perfectly straight). 11. LOWER BOSS (Union & Subtraction): A protruding rectangular block (Length 20mm in X, Width 16mm in Z, Height 15mm in Y) extending downward from the bottom face, intersected by a transverse cylindrical hole parallel to the Z-axis with a diameter of 6.35mm, centered at X = -10.41mm, Y = -22.99mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Block Length (X) | 88 mm | 40 – 200 |
| Block Width (Z) | 40 mm | 15 – 100 |
| Block Height (Y) | 40 mm | 15 – 100 |
| Front Shoulder X | 10 mm | -50 – 80 |
| Bottom Face Y | -15 mm | -60 – 20 |
| Bore Diameter | 6.7 mm | 2 – 20 |
| Bore Front X | 50 mm | 0 – 200 |
| Bore Rear X | -100 mm | -300 – 0 |
| Socket Diameter | 25.27 mm | 8 – 45 |
| Socket Depth | 17.02 mm | 1 – 60 |
| Clearance Tunnel Dia | 11 mm | 2 – 30 |
| Clearance Tunnel Y | 25 mm | -40 – 60 |
| Chamfer X | -2 mm | -40 – 20 |
| Chamfer Leg | 3.5 mm | 0.5 – 12 |
| Chamfer Cut Length | 6 mm | 1 – 30 |
| Channel Front X | -17.02 mm | -60 – 0 |
| Channel Floor Y | -5 mm | -15 – 20 |
| Channel Width (Z) | 28 mm | 8 – 60 |
| Track Width (Y) | 4 mm | 1 – 12 |
| Track Depth (Z) | 2 mm | 0.5 – 8 |
| Track Centre Y | 0 mm | -15 – 25 |
| Pin Hole X | -61.47 mm | -80 – -20 |
| Pin Hole Y | -5 mm | -20 – 20 |
| Pin Hole Dia | 6.35 mm | 2 – 16 |
| Seat Tilt Angle | 11.5 deg | 0 – 45 |
| Seat X | -61.47 mm | -80 – -20 |
| Seat Y | -5 mm | -20 – 20 |
| Boss Length (X) | 20 mm | 5 – 60 |
| Boss Width (Z) | 16 mm | 5 – 50 |
| Boss Height (Y) | 15 mm | 3 – 40 |
| Boss Centre X | -10.41 mm | -60 – 10 |
| Boss Hole Dia | 6.35 mm | 2 – 16 |
| Boss Hole Y | -22.99 mm | -45 – -15 |
| Ramp Base Diameter | 8 mm | 2 – 20 |
| Ramp Taper Angle | 32 deg | 5 – 80 |
| Ramp Base X | -17.02 mm | -60 – 0 |
| Ramp Centre Y | -3 mm | -15 – 15 |
| Ramp Offset Z | 4 mm | 0.5 – 13 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no