Brackets and mounts
LITTORAL ONE ROV
- Bounding box
- 571.5 × 421.5 × 309.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 27
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing LITTORAL ONE underwater ROV model. Keep the rectangular black tubular frame and overall dimensions. Improve the propulsion system with exactly SIX clearly visible underwater thrusters: 1. Four horizontal thrusters mounted at the four corners of the frame, oriented at 45 degrees inward/outward in an X configuration. Their propeller axes must be horizontal. 2. Two vertical thrusters mounted inside the frame, one near the front and one near the rear. Their propeller axes must be vertical, pointing upward/downward. Each thruster must have a blue cylindrical motor housing and a clearly visible circular protective propeller guard. Improve the front section: - Position the transparent camera dome at the front center. - Add two separate waterproof LED spotlights symmetrically on both sides of the camera. - Orient the camera and spotlights forward. Improve the central enclosure: - Keep a transparent cylindrical pressure housing. - Add realistic end caps and visible O-ring sealing details. - Add a rear waterproof tether cable connector. Improve the buoyancy system: - Keep two yellow flotation blocks mounted above the frame. - Add two adjustable ballast weights underneath the frame. Make all six thrusters individually identifiable and correctly positioned. Maintain mechanical symmetry and realistic engineering proportions. The result should look like a professional underwater inspection ROV, ready for further mechanical engineering development.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 550 mm | 200 – 800 |
| Overall width | 400 mm | 150 – 600 |
| Overall height | 300 mm | 150 – 500 |
| PVC pipe diameter | 25 mm | 10 – 50 |
| Enclosure diameter | 120 mm | 50 – 200 |
| Enclosure length | 300 mm | 100 – 500 |
| Dome diameter | 120 mm | 50 – 200 |
| Guard diameter | 100 mm | 50 – 150 |
| Housing length | 70 mm | 30 – 150 |
| Housing diameter | 50 mm | 20 – 100 |
| Propeller diameter | 80 mm | 30 – 120 |
| Propeller blades | 3 mm | 2 – 6 |
| Guard ring thickness | 6 mm | 2 – 12 |
| Guard spokes | 3 mm | 3 – 6 |
| Horizontal thruster cant | 45 deg | 0 – 90 |
| Corner thruster inset | 5 mm | 0 – 30 |
| Vertical thruster clearance | 15 mm | 0 – 60 |
| Block length | 300 mm | 100 – 500 |
| Block width | 100 mm | 40 – 200 |
| Block height | 80 mm | 30 – 150 |
| Weight length | 150 mm | 50 – 300 |
| Weight width | 50 mm | 20 – 150 |
| Weight height | 30 mm | 10 – 100 |
| O-ring cord diameter | 5 mm | 2 – 10 |
| LED diameter | 40 mm | 20 – 80 |
| Camera diameter | 60 mm | 30 – 100 |
| Connector diameter | 40 mm | 20 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl