Enclosures and housings
Linkage Lever with Slider Block
- Bounding box
- 209.1 × 221.9 × 5.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 12, 2026
Download
Free to download and use. See the terms.
The prompt
Add an 80mm Bottom Link arm. Connect one end of this new arm directly to the joint where the 70mm Top Link and 60mm Middle Link meet. Now, generate a 30x30mm square Slider Block, place a hole in its center, and pin it to the free bottom end of the 80mm Bottom Link
Parameters
| Name | Value | Range |
|---|---|---|
| Total length over end bosses | 80 mm | 20 – 300 |
| Pin hole diameter | 5 mm | 2 – 20 |
| End boss diameter | 10 mm | 6 – 40 |
| Part thickness | 5 mm | 2 – 20 |
| Arm web width | 10 mm | 4 – 40 |
| Middle link length | 60 mm | 20 – 300 |
| Middle link angle | 30 deg | -180 – 180 |
| Handle pivot distance | 40 mm | 10 – 200 |
| Handle grip length | 120 mm | 20 – 400 |
| Handle bend angle | 20 deg | -180 – 180 |
| Bottom link length | 80 mm | 20 – 300 |
| Bottom link angle | -90 deg | -180 – 180 |
| Slider block size | 30 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox