Enclosures and housings
LILYGO T4 Enclosure Assembly
- Bounding box
- 116.0 × 81.0 × 66.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- August 9, 2026
Download
Free to download and use. See the terms.
The prompt
I have a LILYGO T4 display ESP32 controller. Design me a case that I can 3D print on a FDM 3D printer and make the design look like a very nice pice that I WOULD PUT ON MY TABLE
Parameters
| Name | Value | Range |
|---|---|---|
| Shell Width | 110 mm | 80 – 150 |
| Shell Depth | 75 mm | 50 – 100 |
| Shell Height | 60 mm | 40 – 80 |
| Display Tilt Angle | 30 deg | 10 – 45 |
| Wall Thickness | 3 mm | 2 – 5 |
| Display Window Width | 70 mm | 50 – 90 |
| Display Window Height | 50 mm | 30 – 70 |
| Display Recess Depth | 2 mm | 1 – 3 |
| Number of Vent Slots (per side) | 4 | 1 – 8 |
| Slot Length | 20 mm | 10 – 40 |
| Slot Width | 2 mm | 1 – 4 |
| Slot Distance from Bottom | 10 mm | 5 – 20 |
| USB Cutout Width | 10 mm | 6 – 15 |
| USB Cutout Height | 5 mm | 3 – 8 |
| USB Y Position (from front) | 15 mm | 10 – 50 |
| USB Z Position (from bottom) | 10 mm | 5 – 40 |
| Back Cover Width | 95 mm | 70 – 110 |
| Back Cover Height | 60 mm | 40 – 80 |
| Back Cover Thickness | 3 mm | 2 – 4 |
| Screw Hole Diameter | 3.2 mm | 2 – 5 |
| Screw Hole Inset from Edge | 5 mm | 3 – 10 |
| USB Opening Width | 10 mm | 6 – 15 |
| USB Opening Height | 4 mm | 2 – 6 |
| USB Opening Bottom Offset | 8 mm | 3 – 20 |
| Reset Button Hole Diameter | 3.2 mm | 2 – 5 |
| Reset Hole X Offset | -30 mm | -50 – 0 |
| Reset Hole Z Offset | 25 mm | 10 – 50 |
| GPIO Opening Width | 20 mm | 10 – 40 |
| GPIO Opening Height | 6 mm | 3 – 10 |
| GPIO Opening Bottom Offset | 50 mm | 40 – 60 |
| Bezel Frame Width | 5 mm | 2 – 10 |
| Bezel Thickness | 4 mm | 2 – 6 |
| Bezel Corner Radius | 5 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox