Brackets and mounts
license_plate_light_camera_mount
- Bounding box
- 64 × 40 × 34 mm
- Engine
- 3D Printing B-rep
- Parameters
- 21
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
I NEED A CAMERA HOLDER FOR CUBIC REVERSE CAMERA OF THE CAR WHICH WILL MOUNT INSTEAD OF THE LICIENSE PLATE LIGHT SO IT HAS TO HAVE TWO LATCHES TO LOCK IN PLACE
Parameters
| Name | Value | Range |
|---|---|---|
| Flange width | 64 mm | 40 – 120 |
| Flange height | 40 mm | 26 – 90 |
| Flange thickness | 3 mm | 2 – 8 |
| Flange corner radius | 6 mm | 0 – 16 |
| Camera cube edge | 25 mm | 15 – 60 |
| Clearance per side | 0.3 mm | 0.05 – 1 |
| Cradle wall thickness | 2.6 mm | 1.2 – 6 |
| Cradle height above flange | 22 mm | 8 – 60 |
| Snap rib diameter | 2 mm | 1 – 5 |
| Snap rib protrusion | 0.6 mm | 0.1 – 1.5 |
| Snap rib length | 12 mm | 4 – 40 |
| Release slot width | 1.2 mm | 0.6 – 3 |
| Release slot depth | 12 mm | 4 – 40 |
| Cable slot width | 14 mm | 4 – 30 |
| Cable slot depth | 6 mm | 2 – 16 |
| Panel thickness at light aperture | 5 mm | 1 – 15 |
| Latch outer face spacing | 34 mm | 16 – 90 |
| Latch width | 7 mm | 3 – 20 |
| Latch thickness | 2 mm | 1.2 – 4 |
| Hook engagement | 2 mm | 0.6 – 4 |
| Latch length past panel | 4 mm | 1 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl