Enclosures and housings
Lens with Retaining Bezel and Mesh Guard
- Bounding box
- 122 × 122 × 14 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
I would like to have a model of a clear plastic lens with a secondary cover, the lens is circular with a diameter of 109mm at its widest points, with a thickness of 1.5mm,, then the cover needs to be a black piece that can hold this lense in place its open diameter should be 108mm followerd by a lip at 110mm with a 5mm gap and then a another lip at 116mm so it can be slid over a round section that the lens sits within, then across it the opensextoin that is of the cover their needs to be a mesh to protect the lens from rock chips and such,
Parameters
| Name | Value | Range |
|---|---|---|
| Lens diameter | 109 mm | 60 – 150 |
| Lens thickness | 1.5 mm | 0.8 – 5 |
| Lens edge chamfer | 0.3 mm | 0 – 1 |
| Front aperture diameter | 108 mm | 60 – 150 |
| Lens seat bore diameter | 110 mm | 80 – 160 |
| Rear bore, slides over housing | 116 mm | 80 – 170 |
| Wall thickness at rear bore | 3 mm | 1.2 – 8 |
| Overall cover depth | 14 mm | 8 – 40 |
| Mesh pocket depth | 1.4 mm | 0.8 – 4 |
| Internal baffle thickness | 1 mm | 0.6 – 4 |
| Baffle radial lip width | 1.5 mm | 0.8 – 4 |
| Bore length below lens seat | 5 mm | 1 – 15 |
| Front section overhang | 1 mm | 0.6 – 5 |
| Edge chamfer | 0.8 mm | 0 – 2 |
| Mesh disc diameter | 108 mm | 60 – 150 |
| Mesh thickness | 1 mm | 0.6 – 3 |
| Grid opening size | 2 mm | 1 – 6 |
| Grid strand width | 1 mm | 0.8 – 3 |
| Solid bonding rim width | 2 mm | 1 – 5 |
| Radial clearance mesh / pocket | 0.2 mm | 0.1 – 0.5 |
| Lens overlap into baffle | 0.4 mm | 0.2 – 1 |
| Mesh overlap into baffle | 0.2 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,