Enclosures and housings
Lego Display Stand Base (Japan Style)
- Bounding box
- 105 × 115 × 15.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
A rectangular display stand base for a Lego model, 105mm wide, 115mm deep, 15mm high, rounded corners, flat top surface, solid for 3D printing in japan type
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 105 mm | 20 – 300 |
| Overall depth | 115 mm | 20 – 300 |
| Overall height | 15 mm | 3 – 60 |
| Corner radius | 8 mm | 0.5 – 25 |
| Inset of engraved frame from edge | 7 mm | 3 – 25 |
| Engraved frame band width | 1.6 mm | 0.6 – 4 |
| Engraved frame depth | 0.8 mm | 0.4 – 2 |
| Hinomaru (red sun) diameter | 46 mm | 10 – 90 |
| Depth of sun inlay recess | 1.5 mm | 0.6 – 4 |
| Printed sun disc thickness | 1.8 mm | 1 – 5 |
| Radial clearance of inlay | 0.25 mm | 0.1 – 0.5 |
| Gap between sun and engraved ring | 6 mm | 2 – 20 |
| Engraved ring width | 1.2 mm | 0.6 – 3 |
| Engraved ring depth | 0.8 mm | 0.4 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,