Enclosures and housings
LCD Handheld Enclosure with Removable Locked Lid
- Bounding box
- 84.0 × 75.8 × 59.8 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- October 11, 2026
Download
Free to download and use. See the terms.
The prompt
I want a box with a opening at top for 2.4inch lcd and on top 4push buttons on right centre 2 side by side and 2 below it and on left w butns ide by ide and on the bottom of the to 4 buttons side by side al buttons are puh buttons and I want space not just for the circle top part of the button but for the whole square part and keep the button a bit away from screen bcz screen is 2.4 inch but it's pcb is 1.5 cm big from each side and add a small hole fr a led on the side opposite to the screen mean the wall of box that is height on the back of the box keep the hole in right side and below touching the base of box and keep the hieght 5.5cm and keep breadth and length minimum and h ve two type c ports anthe bottom of box and make box lid removable with a small lock to close it
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length (X) | 84 mm | 50 – 200 |
| Body Width (Y) | 74 mm | 50 – 200 |
| Body Height (Z) | 55 mm | 25 – 150 |
| Wall Thickness | 2 mm | 1 – 6 |
| LCD Opening Width | 70 mm | 20 – 180 |
| LCD Opening Depth | 50 mm | 20 – 180 |
| Button Cut-out Size | 12 mm | 4 – 30 |
| Button Spacing | 5 mm | 1 – 20 |
| Button Offset Below Top | 10 mm | 2 – 40 |
| Type-C Slot Width | 9 mm | 3 – 20 |
| Type-C Slot Depth | 4 mm | 2 – 12 |
| Type-C Port Spacing | 24 mm | 10 – 60 |
| LED Hole Diameter | 3 mm | 1 – 8 |
| LED Hole Y Position | 30 mm | 0 – 33 |
| LED Hole Height | 6 mm | 3 – 40 |
| Lid Length | 80 mm | 40 – 200 |
| Lid Width | 70 mm | 40 – 200 |
| Lid Thickness | 3 mm | 1 – 10 |
| Lid Lock Hole Dia | 3 mm | 1 – 8 |
| Lock Hole Y Position | 30 mm | 0 – 33 |
| Clip Width (X) | 5 mm | 2 – 20 |
| Clip Thickness | 2 mm | 1 – 6 |
| Clip Top Leg Length | 12 mm | 4 – 30 |
| Clip Drop Leg Length | 5 mm | 2 – 20 |
| Lock Pin Diameter | 2.8 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no