Enclosures and housings
Layer 4 Parametric CAD Solid
- Bounding box
- 737.0 × 274.0 × 55.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 1, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single parametric CAD solid representing Layer 4 of an engineering drawing. Units: mm. Overall dimensions: Length X = 737 mm. Width Y = 274 mm. Thickness Z = 55 mm. Use the lower-left corner as X=0, Y=0. Create the external perimeter exactly according to the supplied drawing. The top-left area contains multiple rectangular cutouts. The lower-left area contains a U-shaped opening with horizontal dimensions: 48 mm + 130 mm + 48 mm. The right side contains a large rectangular recessed/open area with two equal horizontal dimensions of 131.5 mm. Include the semicircular/radiused features shown in the drawing: R12.5 R13.5 Preserve the following dimensions: 737 overall length 274 overall width 212 vertical feature dimension 32 lower feature dimension 25 vertical feature dimension 48 / 130 / 48 horizontal dimensions 131.5 / 131.5 right-side dimensions. All cutouts must be through the entire 55 mm thickness unless the drawing explicitly shows otherwise. Do not add dimensions that are not specified. Do not scale or mirror the part. Return one editable parametric solid.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length X | 737 mm | 100 – 2000 |
| Overall Width Y | 274 mm | 50 – 1000 |
| Thickness Z | 55 mm | 5 – 200 |
| U-Opening Left Horizontal | 48 mm | 1 – 200 |
| U-Opening Center Horizontal | 130 mm | 10 – 500 |
| U-Opening Right Horizontal | 48 mm | 1 – 200 |
| Lower Feature Dimension | 32 mm | 1 – 200 |
| Vertical Feature 212 | 212 mm | 1 – 500 |
| Vertical Feature 25 | 25 mm | 1 – 100 |
| Right Recess Horizontal 1 | 131.5 mm | 10 – 500 |
| Right Recess Horizontal 2 | 131.5 mm | 10 – 500 |
| Radius R12.5 | 12.5 mm | 0.5 – 20 |
| Radius R13.5 | 13.5 mm | 0.5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no