Jigs and fixtures
Laptop Stand Feet Wedge Pair
- Bounding box
- 210.0 × 25.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- August 31, 2026
Download
Free to download and use. See the terms.
The prompt
`Create a functional, minimalist pair of 3D printable laptop stand feet. The design consists of two independent right-angled triangular wedges. Each wedge measures 90 mm in length at the base, 25 mm in depth, and 15 mm in height at the rear elevation point. The bottom and back faces must meet at a sharp 90-degree right angle so it sits completely flat on a print bed. Include an open, unobstructed top slanted edge with a 3 mm wide by 2 mm deep longitudinal groove running across the top for grip attachment. Ensure clean, sharp CAD geometry with flat exterior walls and no organic curves or ornamentation.`
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 90 mm | 50 – 150 |
| Depth | 25 mm | 10 – 60 |
| Rear Height | 15 mm | 5 – 40 |
| Groove Width | 3 mm | 1 – 8 |
| Groove Depth | 2 mm | 0.5 – 5 |
| Layout Gap (X step) | 120 mm | 100 – 250 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl