Enclosures and housings
LABGUARD Front Faceplate
- Bounding box
- 72.0 × 52.0 × 4.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 22, 2026
Download
Free to download and use. See the terms.
The prompt
Design a premium, minimalist, 3D-printable front faceplate for LABGUARD, a compact ESP32-based laboratory environmental monitor. Include one accurately measured opening for an existing 0.96-inch OLED and separate small openings for the installed green, yellow and red status LEDs. Use rounded corners, a clean industrial design and sturdy edges. Match the existing enclosure. Keep USB, screws, wiring and internal components accessible. Use editable dimensions measured from the actual hardware; do not invent hole positions. Export a watertight, FDM-printable solid.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Width | 72 mm | 40 – 140 |
| Plate Height | 52 mm | 30 – 110 |
| Plate Thickness | 3 mm | 1.6 – 6 |
| Corner Radius | 6 mm | 1 – 20 |
| Edge Roundover | 0.8 mm | 0.2 – 1.4 |
| OLED Window Width | 24 mm | 10 – 60 |
| OLED Window Height | 13.5 mm | 6 – 40 |
| OLED Window Corner Radius | 1.5 mm | 0.5 – 6 |
| OLED Centre X Offset | 0 mm | -30 – 30 |
| OLED Centre Y Offset | 8 mm | -25 – 25 |
| Raised Bezel Width | 3 mm | 0 – 8 |
| Raised Bezel Height | 1 mm | 0 – 3 |
| LED Hole Diameter | 3.2 mm | 1.5 – 8 |
| LED Pitch (centre to centre) | 8 mm | 3 – 20 |
| LED Row Y Offset | -14 mm | -45 – 45 |
| Screw Hole Diameter | 3.4 mm | 2 – 6 |
| Screw Offset X | 29 mm | 5 – 65 |
| Screw Offset Y | 19 mm | 5 – 50 |
| Cable Relief Slot Width | 14 mm | 0 – 40 |
| Cable Relief Slot Depth | 4 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no