Brackets and mounts
L-Shaped Structural Channel Bracket
- Bounding box
- 150.0 × 60.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
> Create a 2D Isometric Projection drawing (or AutoCAD script) of an L-shaped structural channel bracket in metric units (SI) using isometric axes (30° and 150°), with all visible object lines on layer `VIS` and all dimensions on layer `DIM`: > > > 1. **Overall Dimensions:** > * Total length along the bottom-left 150° isometric axis (Front View): **150** > * Total depth along the bottom-right 30° isometric axis (Right View): **60** > * Total height along the vertical 90° axis: **60** > > > > > 2. **Right-Facing L-Profile (30° Plane):** > * Starting from the bottom-right corner, draw a bottom horizontal edge of **60** up-right at 30°, a back vertical edge of **60** straight up, a top back-wall thickness of **20** down-left at 210°, an inner vertical step down of **40**, and an inner horizontal shelf of **40** down-left at 210°, connecting down to a **20**-high front-right vertical edge. > > > > > 3. **Left-Facing Extrusion (150° Plane):** > * Extrude this L-profile **150** units up-left along the 150° isometric axis so the front-left face displays a **150 × 20** lower base rectangle and a **150 × 40** upper vertical wall face. > > > > > 4. **Dimensioning (Layer `DIM`):** > * Add isometric-aligned dimensions (`DIMALIGNED` with 30° / -30° oblique extension lines) without over-dimensioning: label length **150**, base height **20**, upper wall height **40**, back-wall thickness **20**, and shelf depth **40**. > > > > > >
Parameters
| Name | Value | Range |
|---|---|---|
| Length along 150° axis | 150 mm | 50 – 300 |
| Depth along 30° axis | 60 mm | 20 – 200 |
| Total vertical height | 60 mm | 20 – 200 |
| Base height | 20 mm | 5 – 120 |
| Upper wall height | 40 mm | 5 – 120 |
| Back wall thickness | 20 mm | 5 – 120 |
| Shelf depth | 40 mm | 5 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
