Enclosures and housings
L-Shaped Sectional Sofa Base Frame
- Bounding box
- 2800 × 1800 × 180 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a modern L-shaped sectional sofa base frame using millimeters. Overall dimensions: - Total width: 2800 mm - Total depth: 1800 mm - Base height: 180 mm Configuration: - Main sofa section: 2800 mm wide and 900 mm deep. - Right chaise lounge section: 900 mm wide, extending the total depth to 1800 mm. - The chaise must be on the RIGHT when viewing the sofa from the front. - Create a precise L-shaped footprint using two connected rectangular solid platforms. - Keep the top surface flat and level. - Use clean, straight modern geometry. - Slightly round all external edges with 10 mm radius. - No cushions, upholstery, legs or backrests yet. - Generate a solid, editable parametric CAD model.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width, X axis | 2800 mm | 1200 – 4000 |
| Overall depth, Y axis | 1800 mm | 600 – 3000 |
| Base frame height, Z axis | 180 mm | 60 – 400 |
| Seat depth of the long main section | 900 mm | 300 – 2000 |
| Width of the chaise, right hand side | 900 mm | 300 – 2000 |
| Vertical corner radius | 10 mm | 1 – 40 |
| Top / bottom edge roundover | 10 mm | 1 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,