Brackets and mounts
L-Shaped Mounting Bracket (Test)
- Bounding box
- 100.0 × 50.0 × 50.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Test L-shaped mounting bracket: base 100mm x 50mm, vertical section 50mm high, thickness 5mm, four 6mm mounting holes, rounded external corners.
Parameters
| Name | Value | Range |
|---|---|---|
| Base length | 100 mm | 40 – 200 |
| Bracket width | 50 mm | 20 – 100 |
| Vertical section height (overall, from base underside) | 50 mm | 20 – 150 |
| Thickness | 5 mm | 2 – 12 |
| Mounting hole diameter | 6 mm | 2 – 12 |
| Hole spacing across width | 30 mm | 10 – 80 |
| Base hole distance from back face | 65 mm | 20 – 190 |
| Vertical hole height above base underside | 30 mm | 12 – 140 |
| Outer bend radius | 10 mm | 5 – 20 |
| Outer plate corner radius | 6 mm | 1 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl