Brackets and mounts
L-Bracket
- Bounding box
- 80.0 × 73.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Design an L-shaped structural mounting bracket. The base plate is 80 mm long, 50 mm wide, and 6 mm thick, with two 6.5 mm diameter through-holes spaced 50 mm apart along the length, centered on the width. The vertical wall rises 60 mm from one end of the base plate, is 50 mm wide and 6 mm thick, and has a single centered 10 mm through-hole located 35 mm above the bottom face. Add a 4 mm thick triangular gusset rib centered along the width connecting the inner faces of the base and vertical wall, and apply 3 mm fillets to all outer vertical edges.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 80 mm | 50 – 150 |
| Base Width | 50 mm | 20 – 150 |
| Base Thickness | 6 mm | 3 – 20 |
| Base Hole Diameter | 6.5 mm | 3 – 20 |
| Base Hole Spacing | 50 mm | 20 – 130 |
| Wall Height | 60 mm | 30 – 150 |
| Wall Thickness | 6 mm | 3 – 20 |
| Wall Hole Diameter | 10 mm | 4 – 25 |
| Wall Hole Height Above Bottom | 35 mm | 10 – 140 |
| Gusset Thickness | 4 mm | 2 – 20 |
| Gusset Leg Length | 30 mm | 10 – 70 |
| Outer Vertical Fillet Radius | 3 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
