Enclosures and housings
Kicker thruster pod housing — duct, plate, nose cone, cable cover, hub
- Bounding box
- 223.2 × 269.3 × 340.6 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Finish the thruster pod housing (everything except the prop): duct, CNC motor plate, nose cone, cable cover up the top arm, prop hub and shaft.
Parameters
| Name | Value | Range |
|---|---|---|
| Prop diameter | 220 mm | 160 – 260 |
| Tip clearance (per side) | 2 mm | 1 – 5 |
| Duct length | 115 mm | 70 – 160 |
| Inlet flare (radial) | 15 mm | 6 – 30 |
| Max wall thickness | 18 mm | 8 – 30 |
| Inlet lip wall | 6 mm | 3 – 12 |
| Exit wall | 3 mm | 2 – 8 |
| Plate front face ahead of duct | 48 mm | 30 – 80 |
| Plate thickness | 8 mm | 5 – 12 |
| Plate disc diameter | 70 mm | 60 – 90 |
| Lower arm width | 14 mm | 8 – 25 |
| Top arm width | 24 mm | 18 – 35 |
| Motor bolt circle | 44 mm | 25 – 50 |
| Motor bolt hole | 4.3 mm | 3 – 6 |
| Center clearance hole | 14 mm | 8 – 20 |
| Motor wire hole | 10 mm | 6 – 14 |
| Wire hole radius (top) | 18 mm | 12 – 24 |
| Leg tab height | 70 mm | 40 – 120 |
| Leg tab width | 50 mm | 30 – 70 |
| Leg bolt hole (M6) | 6.5 mm | 5 – 9 |
| Strut bolt hole (M5) | 5.3 mm | 4 – 7 |
| Nose cone length | 60 mm | 35 – 100 |
| Nose cavity radius at base | 24 mm | 15 – 30 |
| Nose screw radius | 29.5 mm | 26 – 40 |
| Nose screw engagement | 10 mm | 6 – 20 |
| Cable slot width | 12 mm | 8 – 16 |
| Cable cover depth | 13 mm | 9 – 20 |
| Cable groove width | 11 mm | 7 – 16 |
| Cable groove depth | 10 mm | 6 – 16 |
| Motor bell diameter | 63 mm | 50 – 70 |
| Motor bell length | 74 mm | 50 – 100 |
| Shaft diameter | 8 mm | 5 – 12 |
| Hub body diameter | 22 mm | 14 – 35 |
| Hub body length | 25 mm | 15 – 40 |
| Hub flange diameter | 44 mm | 30 – 60 |
| Hub flange thickness | 5 mm | 3 – 10 |
| Prop bolt circle | 33 mm | 24 – 50 |
| Prop bolt hole (M4 tap) | 3.3 mm | 2.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,