Brackets and mounts
Kicker thruster pod — duct, motor plate, prop hub
- Bounding box
- 163.2 × 269.3 × 340.6 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
DIY thruster pod for a 12 ft boat electric kicker: 6374 outrunner motor, ~220 mm prop in a printed Kort-style duct, CNC aluminum motor plate with 3 arms and leg-mount tab, lathe-turned prop hub.
Parameters
| Name | Value | Range |
|---|---|---|
| Prop diameter | 220 mm | 160 – 260 |
| Tip clearance (per side) | 2 mm | 1 – 5 |
| Duct length | 115 mm | 70 – 160 |
| Inlet flare (radial) | 15 mm | 6 – 30 |
| Max wall thickness | 18 mm | 8 – 30 |
| Inlet lip wall | 6 mm | 3 – 12 |
| Exit wall | 3 mm | 2 – 8 |
| Plate front face ahead of duct | 48 mm | 30 – 80 |
| Plate thickness | 8 mm | 5 – 12 |
| Plate disc diameter | 70 mm | 50 – 90 |
| Arm width | 14 mm | 8 – 25 |
| Motor bolt circle | 44 mm | 25 – 60 |
| Motor bolt hole | 4.3 mm | 3 – 6 |
| Center clearance hole | 14 mm | 8 – 25 |
| Motor wire hole | 10 mm | 6 – 16 |
| Leg tab height | 70 mm | 40 – 120 |
| Leg tab width | 40 mm | 25 – 60 |
| Leg bolt hole (M6) | 6.5 mm | 5 – 9 |
| Strut bolt hole (M5) | 5.3 mm | 4 – 7 |
| Motor bell diameter | 63 mm | 50 – 70 |
| Motor bell length | 74 mm | 50 – 100 |
| Shaft diameter | 8 mm | 5 – 12 |
| Hub body diameter | 22 mm | 14 – 35 |
| Hub body length | 25 mm | 15 – 40 |
| Hub flange diameter | 44 mm | 30 – 60 |
| Hub flange thickness | 5 mm | 3 – 10 |
| Prop bolt circle | 33 mm | 24 – 50 |
| Prop bolt hole (M4 tap) | 3.3 mm | 2.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl