Mechanical parts
K26 Compression Spring (5.5 in)
- Bounding box
- 34.9 × 34.9 × 139.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 4
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
5.5" x K26 spring
Parameters
| Name | Value | Range |
|---|---|---|
| Free length — 5.5 in | 139.7 mm | 50 – 250 |
| Outside diameter — 1.375 in | 34.9 mm | 10 – 80 |
| Wire diameter — 0.105 in | 2.7 mm | 1 – 6 |
| Total coils (turns) | 11 mm | 3 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
Two-Joint Robotic Arm with Parallel Gripper
i want a 2 joint robotic arm with parallel gripper simple design. Servo-Base: smart/serial-bus servo, true 360° positional control. Turret rides on a bearing so the servo only driv
