Enclosures and housings
Jiyanshi Name Tag
- Bounding box
- 100 × 60 × 3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 100 × 60 × 3 mm 3D-printable name tag with 6 mm rounded corners, an 8 × 15 mm cut-through slot near the top with at least 4 mm edge clearance, a continuous 2 mm wide border raised 0.8 mm, and the name “Jiyanshi” with “9KL” beneath it in solid lettering raised 1 mm. Use a minimum letter stroke width of 1.2 mm. Add elegant raised flowers, leaves and a small science flask motif. Keep everything single-colour, joined into one watertight solid, with a flat back and no engraving. Preserve the exact dimensions. Export STL and, if possible, an editable CAD file.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 100 mm | 60 – 200 |
| Depth | 60 mm | 30 – 120 |
| Base thickness | 2 mm | 1 – 2.8 |
| Border raise | 0.8 mm | 0.6 – 1.2 |
| Letter/motif raise | 1 mm | 0.8 – 1.5 |
| Corner radius | 6 mm | 1 – 12 |
| Border width | 2 mm | 1.2 – 4 |
| Slot width | 8 mm | 4 – 20 |
| Slot length | 15 mm | 8 – 30 |
| Slot top edge clearance | 4 mm | 3 – 10 |
| Name text size | 16 mm | 10 – 24 |
| Sub-text size | 11 mm | 8 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no