JBL Live Beam 3 Charging Case Cut-out

1 views

Bounding box: 62 × 28 × 54 mm
Engine: 3D Printing B-rep
Parameters: 22
Published: November 13, 2026

Download

Free to download and use. See the terms.

The prompt

create a 3D model for JBL Live Beam 3 that I can use as a cut-out to design a casing for it. There should be cut out for the charging port and reset button

Parameters

Name	Value	Range
Width	62 mm	30 – 120
Depth	28 mm	15 – 60
Height	54 mm	25 – 120
Vertical corner radius	10 mm	2 – 24
Top edge radius	8 mm	1 – 24
Bottom edge radius	3 mm	0.5 – 10
Seam height	22 mm	5 – 110
Seam groove height	1.2 mm	0.6 – 4
Seam groove depth	1 mm	0.2 – 4
Display width	36 mm	10 – 100
Display height	18 mm	5 – 60
Display corner radius	4 mm	0.5 – 10
Display centre height	34 mm	5 – 110
Display recess depth	0.8 mm	0.2 – 3
Port cut-out width	9 mm	4 – 24
Port cut-out height	3.4 mm	1.5 – 10
Port centre height	6.5 mm	2 – 40
Port cut-out depth	5 mm	1 – 20
Reset cut-out diameter	3.2 mm	1.2 – 10
Reset cut-out X offset	17 mm	-40 – 40
Reset cut-out height	6.5 mm	2 – 40
Reset cut-out depth	6 mm	1 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS