Enclosures and housings
J-Shaped Cribbage Board (Exploded Parts)
- Bounding box
- 455 × 100 × 24 mm
- Engine
- 3D Printing B-rep
- Parameters
- 25
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
J-shaped cribbage board. - 120 peg holes for two players. - 1/8-inch (3.175 mm) peg holes. - LEGO-style raised studs. - Built-in peg-storage compartment. - Hinged lid with a 1.75 mm hinge pin. - Separate printable parts for easier multicolor printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall board length | 300 mm | 200 – 400 |
| Overall board width | 100 mm | 60 – 160 |
| Board thickness | 18 mm | 10 – 30 |
| Width of the J arms | 45 mm | 25 – 80 |
| Length of the top return arm | 110 mm | 60 – 200 |
| Outline corner radius | 8 mm | 2 – 20 |
| Peg hole diameter | 3.18 mm | 2 – 6 |
| Peg hole depth | 12 mm | 4 – 17 |
| Number of peg rows | 4 mm | 2 – 6 |
| Holes per row | 30 mm | 10 – 40 |
| Hole spacing along X | 9.5 mm | 6 – 16 |
| Row spacing along Y | 11 mm | 5 – 20 |
| Cavity length | 60 mm | 30 – 100 |
| Cavity width | 40 mm | 20 – 70 |
| Cavity depth | 10 mm | 3 – 16 |
| Stud diameter | 4.8 mm | 3 – 8 |
| Stud height | 1.8 mm | 0.6 – 4 |
| Stud grid pitch | 8 mm | 5 – 15 |
| Lid length | 65 mm | 40 – 100 |
| Lid width | 45 mm | 30 – 80 |
| Lid thickness | 4 mm | 2 – 8 |
| Hinge bore diameter | 2.05 mm | 1.8 – 3.5 |
| Hinge pin diameter | 1.75 mm | 1 – 3 |
| Hinge pin length | 30 mm | 12 – 60 |
| Gap between exploded parts | 30 mm | 5 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,