Enclosures and housings
iPhone 17 Pro Max Desktop Phone Stand
- Bounding box
- 100.0 × 65.0 × 75.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- September 20, 2026
Download
Free to download and use. See the terms.
The prompt
Design a single-piece desktop phone stand for iPhone 17 Pro Max. Phone dimensions reference: 163.4mm height x 78mm width x 8.8mm thickness. Stand must accommodate phone with a protective case, so slot width = 11mm. Stand geometry: - Base block: 100mm wide x 65mm deep x 75mm tall - A slanted slot cut into the top surface, tilted back 20 degrees from vertical - Slot depth: 15mm (phone rests in slot, leaning back at 20 degrees) - Slot width: 11mm - Slot does NOT cut through the bottom; leaves 60mm solid base below for stability - Front lip height above slot bottom: 12mm (holds phone from sliding forward) - Add a 2mm chamfer on all outer vertical edges for printability and hand feel Print orientation: stand prints upright with base flat on build plate. No supports allowed. The slanted slot geometry must be designed so overhangs do not exceed 45 degrees from vertical. Wall thickness: 3mm. No assembly, no screws, no hinges. One solid watertight body. Export as STEP and STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Width (X) | 100 mm | 60 – 160 |
| Base Depth (Y) | 65 mm | 50 – 120 |
| Base Height (Z) | 75 mm | 55 – 110 |
| Slot Width (phone + case) | 11 mm | 6 – 16 |
| Slot Depth (along tilt) | 15 mm | 8 – 25 |
| Back Tilt from Vertical | 20 deg | 5 – 35 |
| Front Lip Above Slot Floor | 12 mm | 5 – 25 |
| Outer Vertical Edge Chamfer | 2 mm | 0 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no