Enclosures and housings
iPhone 14 Gaming Case with Detachable Button Overlay
- Bounding box
- 75.0 × 15.0 × 180.0 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
I want to create a iphone 14 case that transforms into physical buttons for emulation game like Delta game emulator. This case should have a detached bottom that we can flip and use to press the buttons on the emulation game on touch screen. The case is exactly like the Gamebaby from Bitlab, but for iphone 14.
Parameters
| Name | Value | Range |
|---|---|---|
| Case Height | 150 mm | 140 – 160 |
| Case Width | 75 mm | 70 – 80 |
| Case Depth | 10 mm | 8 – 15 |
| Side Wall Thickness | 1.5 mm | 0.5 – 3 |
| Top Wall Thickness | 1.5 mm | 0.5 – 3 |
| Bottom Wall Thickness | 1.5 mm | 0.5 – 5 |
| Front Lip Thickness | 1.5 mm | 0.5 – 3 |
| Back Wall Thickness | 1.5 mm | 0.5 – 3 |
| Screen Bezel Margin | 2 mm | 0 – 10 |
| Camera Hole Diameter | 10 mm | 5 – 20 |
| Camera X Offset | -22.5 mm | -37.5 – 37.5 |
| Camera Z Offset | 125 mm | 100 – 145 |
| Side Button Width | 4 mm | 2 – 8 |
| Side Button Height | 8 mm | 4 – 15 |
| Volume Up Z | 110 mm | 90 – 135 |
| Volume Down Z | 95 mm | 75 – 120 |
| Power Button Z | 115 mm | 100 – 135 |
| Port Cutout Width | 20 mm | 10 – 30 |
| Port Cutout Height | 5 mm | 2 – 8 |
| Overlay Width | 75 mm | 70 – 80 |
| Overlay Bottom Height | 30 mm | 20 – 50 |
| Overlay Clip Top Height | 15 mm | 10 – 25 |
| Overlay Slot Height | 10 mm | 5 – 20 |
| Overlay Front Thickness | 5 mm | 3 – 8 |
| Overlay Back Thickness | 2 mm | 1 – 5 |
| Overlay Clearance | 0 mm | -0.5 – 0.5 |
| D-pad Z Center | -12 mm | -25 – 0 |
| D-pad Center Radius | 6 mm | 3 – 10 |
| D-pad Arm Length | 10 mm | 5 – 15 |
| D-pad Arm Width | 4 mm | 2 – 8 |
| Action A X Offset | -12 mm | -30 – 0 |
| Action B X Offset | 12 mm | 0 – 30 |
| Action Button Radius | 5 mm | 2 – 8 |
| Action Buttons Z Center | -12 mm | -25 – 0 |
| Button Protrusion Height | 2 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no