Mechanical parts
Inner-Shoe Foot-Shaped 12-Probe Measurement Machine
- Bounding box
- 280.0 × 110.0 × 97.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
act as a product development engineer and design a machine for inner shoe measurement. 12 probes are used which extends to measure the distance when it touches the shoe surface. each probe tip has a FSR under a silicon pad. the probe length is controlled by a motor via a cord and a spring. the motors are resting at heel collar (open area). the complete design looks like a human foot.
Parameters
| Name | Value | Range |
|---|---|---|
| Foot Length | 280 mm | 200 – 400 |
| Foot Width | 110 mm | 70 – 170 |
| Foot Height | 55 mm | 30 – 90 |
| Shell Wall Thickness | 8 mm | 3 – 20 |
| Base Floor Thickness | 6 mm | 2 – 20 |
| Top Plate Thickness | 12 mm | 5 – 30 |
| Probe Count | 12 pcs | 4 – 12 |
| Probe Rod Diameter | 3 mm | 2 – 5 |
| Probe Rod Length | 60 mm | 40 – 70 |
| Silicon FSR Pad Diameter | 6 mm | 3 – 12 |
| Silicon FSR Pad Thickness | 2 mm | 1 – 5 |
| Guide Cartridge OD | 8 mm | 5 – 15 |
| Guide Cartridge Bore | 3.2 mm | 2.5 – 6 |
| Guide Cartridge Length | 30 mm | 15 – 50 |
| Guide Protrusion Above Shell | 5 mm | 0 – 15 |
| Return Spring OD | 4 mm | 3 – 8 |
| Return Spring ID | 3.2 mm | 2.5 – 6 |
| Return Spring Free Length | 20 mm | 10 – 40 |
| Heel Collar Length | 70 mm | 40 – 120 |
| Heel Collar Width | 60 mm | 30 – 100 |
| Heel Collar Height | 35 mm | 20 – 60 |
| Heel Collar Wall | 4 mm | 2 – 10 |
| Heel Collar Floor Thickness | 5 mm | 2 – 15 |
| Motor Body Diameter | 12 mm | 6 – 20 |
| Motor Body Length | 25 mm | 10 – 40 |
| Cord Spool Diameter | 8 mm | 4 – 14 |
| Cord Spool Height | 6 mm | 3 – 15 |
| Pull Cord Diameter | 0.5 mm | 0.3 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
Two-Joint Robotic Arm with Parallel Gripper
i want a 2 joint robotic arm with parallel gripper simple design. Servo-Base: smart/serial-bus servo, true 360° positional control. Turret rides on a bearing so the servo only driv
