Enclosures and housings
Inline Slider-Crank Mechanism Assembly
- Bounding box
- 400.0 × 156.6 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D mechanical assembly of a inline slider-crank mechanism in metric units (mm): 1. Crank Link: Length 100mm between hole centers, width 20mm, thickness 10mm, with two 10mm diameter pin holes at both ends. 2. Connecting Rod: Length 300mm between hole centers, width 20mm, thickness 10mm, with two 10mm diameter pin holes at both ends. 3. Slider Block: Rectangular block 80mm long, 50mm wide, 40mm high, with a central 10mm diameter pin hole on top for connecting to the rod. 4. Base / Frame: A 400mm long linear guide base with a 10mm fixed pin at one end to hold the Crank. All components should be separate solid bodies aligned along the X-Y plane for assembly. Export as a STEP file.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 400 mm | 200 – 800 |
| Base Width | 100 mm | 40 – 250 |
| Base Thickness | 20 mm | 6 – 60 |
| Fixed Pin Diameter | 10 mm | 4 – 30 |
| Pin Height Above Base | 14 mm | 6 – 60 |
| Pin Offset From Left End | 30 mm | 15 – 200 |
| Mounting Hole Diameter | 8 mm | 3 – 20 |
| Base Corner Fillet | 6 mm | 0 – 20 |
| Crank Hole Centers | 100 mm | 40 – 250 |
| Crank Link Width | 20 mm | 10 – 60 |
| Crank Link Thickness | 10 mm | 4 – 50 |
| Crank Pin Hole Diameter | 10 mm | 3 – 40 |
| Rod Hole Centers | 300 mm | 100 – 600 |
| Rod Width | 20 mm | 10 – 60 |
| Rod Thickness | 10 mm | 4 – 50 |
| Rod Pin Hole Diameter | 10 mm | 3 – 40 |
| Slider Length (X) | 80 mm | 30 – 250 |
| Slider Width (Y) | 50 mm | 20 – 200 |
| Slider Height (Z) | 40 mm | 15 – 150 |
| Slider Pin Hole Diameter | 10 mm | 3 – 40 |
| Slider Top Hole Depth | 30 mm | 5 – 120 |
| Slider Top Edge Fillet | 3 mm | 0 – 12 |
| Crank Angle (from +X) | 75 deg | 0 – 180 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no