Enclosures and housings
Inline AI Apple Inspection Machine
- Bounding box
- 1900.0 × 600.0 × 870.0 mm
- Engine
- Precision B-rep
- Parameters
- 45
- Published
- October 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD prototype of an inline AI apple inspection machine. CRITICAL STRUCTURE: The entire machine must be perfectly straight and inline. BELT → 4 INLINE ROLLERS → BELT The four rollers are arranged in one straight line along the conveyor direction. They are the actual transport surface of the inspection section, NOT underneath the belt and NOT beside the apple. Apples enter from the belt, move onto the four rollers, rotate while moving forward, then transfer directly back onto the belt. Apple size: Ø100–120 mm. Conveyor width: approximately 180 mm. Overall machine: approximately L1900 × W600 × H850 mm. AI inspection module: approximately 400 × 400 mm. Install: One camera above the apple Adjustable LED lighting Adjustable side/lower mirrors Apple detection sensor before the inspection area Protective transparent housing The conveyor height and centerline must remain continuous and straight from input to output. No curved conveyor. No angled outlet. No side transfer. No apple drop. No separate roller conveyor. Show the machine in realistic industrial 3D, including isometric, front, side, and top views.
Parameters
| Name | Value | Range |
|---|---|---|
| Conveyor surface Z | 500 mm | 400 – 600 |
| Belt thickness | 10 mm | 5 – 25 |
| Input belt length | 600 mm | 400 – 900 |
| Belt width | 180 mm | 100 – 300 |
| Output belt length | 800 mm | 600 – 1100 |
| Output belt start X | 1100 mm | 1000 – 1400 |
| Roller diameter | 100 mm | 60 – 140 |
| Roller length | 180 mm | 100 – 300 |
| Roller count | 4 count | 2 – 8 |
| First roller X | 650 mm | 550 – 750 |
| Roller spacing | 150 mm | 100 – 250 |
| Groove count | 8 count | 4 – 16 |
| Groove depth | 3 mm | 0.5 – 8 |
| Groove angle width | 12 deg | 4 – 30 |
| Camera X | 850 mm | 700 – 1000 |
| Camera Z | 800 mm | 650 – 900 |
| Camera body size | 100 mm | 50 – 150 |
| Camera lens diameter | 50 mm | 20 – 80 |
| LED outer size | 400 mm | 300 – 600 |
| LED inner opening | 200 mm | 100 – 350 |
| LED thickness | 20 mm | 5 – 40 |
| LED Z | 700 mm | 550 – 900 |
| Mirror thickness | 5 mm | 2 – 10 |
| Side mirror width | 150 mm | 80 – 250 |
| Side mirror height | 100 mm | 60 – 200 |
| Side mirror Y offset | 200 mm | 120 – 300 |
| Side mirror Z | 600 mm | 450 – 850 |
| Side mirror tilt | 30 deg | 0 – 70 |
| Lower mirror length | 200 mm | 100 – 400 |
| Lower mirror width | 150 mm | 80 – 300 |
| Lower mirror Z | 400 mm | 300 – 700 |
| Lower mirror tilt | 30 deg | 0 – 70 |
| Sensor diameter | 30 mm | 10 – 60 |
| Sensor length | 60 mm | 30 – 120 |
| Sensor X | 550 mm | 450 – 700 |
| Sensor Z | 550 mm | 450 – 750 |
| Housing size | 400 mm | 250 – 600 |
| Housing wall thickness | 10 mm | 2 – 30 |
| Housing center X | 850 mm | 700 – 1000 |
| Housing center Y | 0 mm | -100 – 100 |
| Housing center Z | 650 mm | 450 – 850 |
| Frame length | 1900 mm | 1500 – 2400 |
| Frame width | 600 mm | 400 – 900 |
| Frame height | 850 mm | 600 – 1200 |
| Frame tube size | 40 mm | 20 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no