Brackets and mounts
Industrial Water-to-Air Heat Exchanger
- Bounding box
- 1366.0 × 1350.8 × 1100.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD model of an industrial water-to-air heat exchanger. Use a rectangular metal housing measuring 1200 mm wide, 1000 mm high and 550 mm deep. Add a centred 500 mm diameter circular air inlet on the front face and an identical outlet on the rear face. Connect both ducts to the housing using 400 mm long tapered transitions. On the right-side wall, add two horizontal 80 mm diameter water pipes projecting 150 mm outward, with the hot-water inlet at 800 mm height and return outlet at 200 mm height. Inside the housing, create parallel horizontal heating tubes with thin metal fins and water headers. Add four support feet and a removable side inspection panel. Use simple, clean solid geometry with separate components. Show an isometric view displaying the front air duct and both right-side water connections.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Width | 1200 mm | 600 – 2000 |
| Housing Height | 1000 mm | 500 – 2000 |
| Housing Depth | 550 mm | 300 – 1200 |
| Housing Wall Thickness | 6 mm | 2 – 20 |
| Duct Connection Diameter | 500 mm | 100 – 900 |
| Housing Opening Diameter | 600 mm | 100 – 900 |
| Transition Length | 400 mm | 50 – 1000 |
| Transition Wall Thickness | 4 mm | 1 – 20 |
| Hot Inlet Height Above Housing Bottom | 800 mm | 0 – 1000 |
| Return Outlet Height Above Housing Bottom | 200 mm | 0 – 1000 |
| Water Pipe Diameter | 80 mm | 20 – 300 |
| Water Pipe Projection | 150 mm | 30 – 600 |
| Pipe Flange Diameter | 120 mm | 20 – 400 |
| Pipe Flange Thickness | 10 mm | 2 – 50 |
| Core Width | 900 mm | 200 – 1100 |
| Core Height | 600 mm | 100 – 900 |
| Core Depth | 450 mm | 100 – 520 |
| Header Diameter | 100 mm | 20 – 200 |
| Heating Tube Diameter | 20 mm | 5 – 60 |
| Tube Row Count | 6 count | 1 – 20 |
| Tube Column Count | 6 count | 1 – 20 |
| Fin Count | 6 count | 0 – 30 |
| Fin Thickness | 1.5 mm | 0.5 – 10 |
| Inspection Panel Height | 600 mm | 100 – 900 |
| Inspection Panel Depth | 500 mm | 100 – 510 |
| Panel Thickness | 10 mm | 2 – 30 |
| Panel Flange Width | 20 mm | 0 – 25 |
| Panel Flange Thickness | 6 mm | 1 – 20 |
| Support Foot Size | 80 mm | 20 – 200 |
| Support Foot Height | 100 mm | 10 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o