Enclosures and housings
Industrial Storage Crate 600x400
- Bounding box
- 600.0 × 400.0 × 300.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing industrial plastic storage crate model according to the following specifications. Required dimensional changes: - Overall external Length: 600 mm - Overall external Width: 400 mm - Overall Height: Keep exactly the same as the existing model. - Maintain the existing extrusion height and vertical profile. Design requirements: 1. Preserve the original crate design and appearance. 2. Maintain the open-top rectangular structure. 3. Keep the existing reinforced rib patterns on all four side walls. 4. Preserve the original hand-grip openings. 5. Maintain the existing top rim thickness and profile. 6. Keep the bottom structure and reinforcement details unchanged. 7. Maintain the original wall thickness. 8. Adjust the rib spacing proportionally to fit the new 600 × 400 mm footprint. 9. Maintain proper corner radii and fillets. 10. Ensure the crate remains a single manufacturable plastic component. Important instructions: - Do not redesign the crate. - Do not change the existing height. - Do not remove or simplify structural ribs. - Do not distort the original geometry. - Use millimetres (mm) as units. Final output: Generate a fully editable 3D solid model and export it in STEP (.STEP/.STP) format, compatible with SolidWorks 2022.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 600 mm | 200 – 1200 |
| Overall Width | 400 mm | 150 – 800 |
| Overall Height | 300 mm | 100 – 600 |
| Wall Thickness | 4 mm | 2 – 10 |
| Bottom Thickness | 5 mm | 2 – 15 |
| Corner Radius | 15 mm | 5 – 40 |
| Rim Height | 10 mm | 4 – 30 |
| Rim Inward Protrusion | 4 mm | 1 – 15 |
| Grip Width | 140 mm | 40 – 300 |
| Grip Height | 40 mm | 20 – 100 |
| Grip Corner Radius | 10 mm | 3 – 25 |
| Grip Center Height | 180 mm | 50 – 500 |
| Rib Thickness | 3 mm | 1.5 – 8 |
| Rib Protrusion | 3 mm | 1 – 10 |
| Vertical Rib Spacing | 75 mm | 30 – 150 |
| Rib Top Gap | 5 mm | 0 – 50 |
| Horizontal Rib Height | 120 mm | 20 – 500 |
| Horizontal Rib Thickness | 6 mm | 2 – 20 |
| Bottom Rib Height | 6 mm | 2 – 20 |
| Bottom Rib Spacing | 100 mm | 40 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,