Enclosures and housings
Industrial Shed 15x20x10m with three CHP penetrations at 9m / 3m height
- Bounding box
- 15000.0 × 20000.0 × 10000.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Same industrial shed design as previous, front 6x5m entrance, 100mm slab, high rectangular louvers on left 20m longitudinal wall. Added three actual circular cut-through wall penetrations, separate hollow sleeves and face flanges along the left wall at y=8400,9000,9600 mm measured from the front (group centered 9000 mm), at z=3100mm above ground (3000mm above 100mm slab). Two DN80 water sleeves and one DN150 CHP exhaust sleeve, no internal pipes routed. Shell geometry and nominal sizes preliminary, fireproofing/weatherproofing engineering TBC.
Parameters
| Name | Value | Range |
|---|---|---|
| Shed overall width | 15000 mm | 15000 – 15000 |
| Shed overall length | 20000 mm | 20000 – 20000 |
| Maximum ridge height | 10000 mm | 10000 – 10000 |
| Wall eave height | 8200 mm | 7800 – 8500 |
| Floor slab thickness | 100 mm | 100 – 100 |
| Clear entrance width | 6000 mm | 6000 – 6000 |
| Clear entrance height | 5000 mm | 5000 – 5000 |
| Left rectangular ventilation opening length | 4500 mm | 3500 – 5500 |
| Rectangular vent opening height | 1200 mm | 800 – 1600 |
| Vent bottom height | 6000 mm | 5400 – 6200 |
| Wall cladding thickness | 55 mm | 40 – 80 |
| Indicative roof thickness | 75 mm | 60 – 100 |
| Steel column section envelope | 180 mm | 140 – 240 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,