Brackets and mounts
Industrial Pneumatic Dispenser Stabilizer Clamping Mechanism
- Bounding box
- 570.0 × 514.2 × 852.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
3D CAD SolidWorks render, isometric view of an industrial pneumatic 4-corner top stabilizer mechanism clamping the top of a black vertical water dispenser (Karofi KAD-L55). Double-layer hollow rectangular steel frame (550x450mm) with an open center allowing two chrome water faucets on top of the machine to pass through freely. The upper fixed frame has 4 flange linear bearings (LMF20UU) at the four corners and 2 vertical compact pneumatic cylinders (25mm bore) mounted symmetrically on the left and right sides with M10 floating joints. The lower moving frame is guided by 4 vertical chrome shafts (20mm diameter) at the corners. Crucial detail: at the 4 corners of the lower frame, there are machined guide slots with millimeter ruler markings and orange quick-release clamping levers allowing stepless adjustment of 4 black L-shaped polyurethane corner pads hugging the 4 top corners of the machine. Clean white studio background, technical engineering visualization, photorealistic metallic and matte black textures, high detail
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length (X) | 550 mm | 480 – 700 |
| Frame Width (Y) | 450 mm | 380 – 600 |
| Upper Frame Thickness | 40 mm | 30 – 60 |
| Lower Frame Thickness | 35 mm | 25 – 50 |
| Dispenser Width (X) | 320 mm | 260 – 400 |
| Dispenser Depth (Y) | 400 mm | 320 – 480 |
| Dispenser Visible Height | 500 mm | 300 – 700 |
| Guide Shaft Diameter | 20 mm | 16 – 30 |
| Guide Shaft Length | 260 mm | 200 – 350 |
| Cylinder Bore Dia | 25 mm | 20 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
